- No Items in Cart.
Parker Parker DOT PTC Male Swivel Elbow 90 Degrees 1/2x1/2
Parker - Parker DOT Brass Air Brake Fitting - Push-to-Connect Male Swivel Elbow 90 Degrees 1/2x1/2 (Pack of 10)
Representative Image Only
- WARNING
- TAA Compliant
Welcome. Register now to see your pricing.
Close
Parker - Parker DOT Brass Air Brake Fitting - Push-to-Connect Male Swivel Elbow 90 Degrees 1/2x1/2 (Pack of 10)
Representative Image Only
Parker's Prestomatic Fitting is a robust, all brass push-to-connect fitting that meets SAE and D.O.T. specifications. Designed for all D.O.T. truck and trailer applications, Parker Prestomatic fittings reduce assembly time versus compression style fittings by 90%.
Product Features
Brass Collet
Buna N O-ring
Stainless Steel Tube Support
Meets D.O.T. FMVSS571.106
Meets SAE J2494 & SAE J2494-13
Specifications
Pressure range: Up to 250 PSI
Temperature range: 40° to +200° F (40° to +93.3° C)I
Compatible Tubing: SAE J844 Type A & B nylon tubing
Applications
Air Brakes
Air Tanks
Air Ride
Sliders
Tire Inflation
Primary & Secondary Air Lines
Assembly Instructions
1. Cut tubing squarely.
2. Check that port or mating part is clean and free of debris
3. Mark tubing to appropriate tube insertion length.
4. Insert tubing until it bottoms.
5. Pull on tubing to verify it is fully inserted.
6. To disassemble, simply press release button, hold against body and pull tubing out of fitting.
Parker's Prestomatic Fitting is a robust, all brass push-to-connect fitting that meets SAE and D.O.T. specifications. Designed for all D.O.T. truck and trailer applications, Parker Prestomatic fittings reduce assembly time versus compression style fittings by 90%.
Product Features
Brass Collet
Buna N O-ring
Stainless Steel Tube Support
Meets D.O.T. FMVSS571.106
Meets SAE J2494 & SAE J2494-13
Specifications
Pressure range: Up to 250 PSI
Temperature range: 40° to +200° F (40° to +93.3° C)I
Compatible Tubing: SAE J844 Type A & B nylon tubing
Applications
Air Brakes
Air Tanks
Air Ride
Sliders
Tire Inflation
Primary & Secondary Air Lines
Assembly Instructions
1. Cut tubing squarely.
2. Check that port or mating part is clean and free of debris
3. Mark tubing to appropriate tube insertion length.
4. Insert tubing until it bottoms.
5. Pull on tubing to verify it is fully inserted.
6. To disassemble, simply press release button, hold against body and pull tubing out of fitting.