The Fast-Lok Pin is designed for use in applications where quick and easy removal is desired. The user is reminded to insure pin is properly installed prior to applying load.
NOTE: Minimum ultimate load is 6 times the working load limit. Bolt type anchor shackles supplied with thin head bolt & nut with cotter pin. Meets Federal Specification RR-C 271D, Type IVA, Grade A, Class 3.
Use electrode AWS class E7018 per MIL-E-22200/1
For MIG welding use ER70S-2 or ER70S-6 .035 diameter wire
Center Fast-Lok Plate with 1/16" clearance on each side
Align with top surface of road plate and tack weld in place to start
Preheat the Fast-Lok Plate and roadplate in an area approximately 6" radius around the roadplate cutout hole to 200°-300° F
Preheat temperature must be held during the welding process. A propane torch could be used for this
Use fresh electrodes because old electrodes may have absorbed humidity into the flux which could cause cracking