Gates® Power Crimp® 707 is the most precise, simplest crimper made. It was the first crimper with an electronic digital readout to indicate gauge setting.
The toughest part about using the 707 is pushing a button. It takes just a few seconds to make factory-quality hose assemblies.
Crimps most hydraulic hoses from low-pressure return lines to extremely high-pressure spirals; ranging from 3/16" to 1-1/4" I.D. Crimps straight and bent tube couplings plus 45° and 90° block types. Can also be adapted for use as a power swager.
Crimp settings are available on-line at www.gates.com/ecrimp. Simply indicate the hose and fittings to be crimped, and E-Crimp generates a custom crimp chart.
Standard PC 707 comes without die sets or pump, but is wired for 115V and includes a die back-up ring and a notched cone
Production rate: 100 assemblies per hour (using 1/2" I.D. two-wire straight thread assemblies)
Dimensions: 13"W x 12"D x 26-1/2"H
Weight: 188 lbs.
PC 707 230 Volt Converter Kit (Item No. 1206930)
Pump 1202066 requires an individual 30A fused circuit. The crimper will not operate if this dedicated circuit is not installed.