Anchor locks on wall; hear it pop and lock
Shock- and vibration-resistant
Installs with a screwdriver or screw gun; no pre-drilling necessary
Positive stop resists over-turning
Screw and fixture can be removed, leaving anchor in wall for reuse
Remove and reinstall anchor in same hole
For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw pops open anchor, locking anchor to wall.