Hog Heaven Anti-Fatigue Mat
(Pack of 1)

Product Description

Unique fabric topped anti-fatigue mat. Hog Heaven Fashion features slip resistant solution dyed fabric molded to a solid Nitrile rubber surface for easy cleaning and an attractive appearance. The premium cushion is molded to the Nitrile rubber and fabric surface ensuring a durable construction. Hog Heaven Fashion is available in two thicknesses: 5/8” and 7/8”. Certified slip-resistant by the National Floor Safety Institute. Recommended for use retail environments.
FEATURES
• Outstanding Anti-Fatigue qualities
• Anti-Static, Slip Resistant 100% solution-dyed polypropylene top surface will not fade or rot.
• Closed-cell Nitrile/PVC cushion backing provides long lasting comfort
• Beveled border remains flexible for the life of the mat and will not crack or curl.
• Closed-cell cushion backing is permanently molded to the Nitrile Rubber surface, providing a comfortable long lasting mat.
• Hog Heaven Fashion is available in 2 thicknesses, 5/8” and 7/8”
• Available in four beautiful colors: Granite, Cocoa Brown, Cobalt Blue, Coral Black.
• Certified slip-resistant by the National Floor Safety Institute.
• Recommended for use retail environments
• OVERALL MAT THICKNESS .628" or .875"
• SURFACE
• RUBBER TYPE: Needle-punched polypropylene
• THICKNESS: 14ozs/sy
• CUSHION
• RUBBER TYPE: Nitrile/PVC
• THICKNESS: .5" or .75"
• DENSITY: 5.5 to 7.5 lbx/ft³
• WATER ABSORPTION: ASTM D 1667- .01 lb/sq ft maximum
• FLAMMABILITY: FMVSS302- 0 Burn (pass)
• TEMPERATURE USE: ASTM D 1056- Cold Crack: -20 degrees F High: 200 Degrees intermittent exposure
• BACK
• RUBBER TYPE: 100% Nitrile Rubber (20% Recycled content)
• THICKNESS: .070"
• DUROMETER: 65
• TENSIL: 1100 PSI
• TESTING
• Passes Flammability Standard DOC-FF-1-70
• Passes ATTCC Test method 134-1996 Electrostatic Propensity of Carpets: Maximum Voltage Negative 0.7 KV
• Static Decay Test Method 4046 Federal Standard 101B/NFPA 99 12-4.1.3.8 (f)(3)(i) – Maximum Time Recorded: .91 sec.
• Anti-Static: ANSI/ESD 57-1 1994 Protection of Electrostatic Discharge of Susceptible Items:
• Flooring Materials
• Surface to Ground - 6.4 x 10¹º ohms @ 50% Relative Humidity
• Surface to Griund - 8.2 x 10¹º ohms @ 12% Relative Humidity
• Surface to Surface - 9.3 x 10¹º ohms @ 50% Relative Humidity
• Surface to Surface - 1.2 x 10¹¹ ohms @ 12% Relative Humidity
• ASTM C1028-96 Static Coefficient of Friction: Dry - .71 Wet = ..70
1. Daily Cleaning
•Anti-fatigue mats should be cleaned daily by sweeping or brushing to remove loose soil and debris. These impurities can cause excessive wear on the surface of the mats and shorten product life. The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement.
2. Routine Cleaning
•On a regular basis, anti-fatigue mats should be cleaned with water-based cleaners to remove oil and grease where needed. We do not recommend the use of solvent-based cleaners. It is important to use cleaners strong enough with proper agitation to remove fats and other food related oils. Research has shown that even grease-proof rubber can be affected by grease and oil if the grease and oil are allowed to remain in contact with the mat for extended periods of time. Andersen recommends thorough cleaning at least weekly to avoid prolonged contact of grease with the rubber.