UltraCon® Anchors and Drill Bits
Fast installation drill hole, drive anchor
Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
Replaces expansion anchors, plugs and screws
Hi-Lo threads provide exceptional holding strength with no spalling
Notched cutting edges for easy installation cuts threads into poured concrete, brick or hollow block
Nail point aids in locating hole
Reversible and removable
Stalgard®-coated for superior corrosion resistance withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
Each box of anchors includes corresponding Extra Carbide-Tipped UltraCon® Masonry Hammer Drill Bit these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor
5/16" dia. UltraCon® Anchors have a silver Stalgard® finish.
Hex washer head anchors have a large 5/8" washer dia.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.