Air Brake Rubber Hose 3/8" ID x 3/4" OD
(Pack of
1.0)
• Black synthetic rubber tube with neoprene cover
• Multi-spiral reinforcement
• Supplied in 50-foot rolls
• Easy to assemble, reusable hose ends
• Brass material offers excellent corrosion resistance
• Meets SAE Specification J1402
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Use on air brake hose lines
Assembly information
1. Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.
3. Screw nut until contact is made with body hex.
Frequently Bought Together
Zinc Steel Hydraulic Brake Lines 5/16" x 40"
Couldn't load pickup availability
Eclipse Air Brake Coil Hose Assembly 1/2" OD x 12'
Couldn't load pickup availability
Zinc Steel Hydraulic Brake Lines 3/16" x 60"
Couldn't load pickup availability
Super 77 Hose Clamp SS 7/16 to 1 In"
Couldn't load pickup availability
DOT Union Tee Nylon 1/4 x 1/4 x 1/4"
Couldn't load pickup availability
DOT Connector Male Brass 1/2 x 1/2-14
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #12 7/8 to 1-1/4"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #16 11/16 to 1-1/2"
Couldn't load pickup availability
Fuel Line Hose 5/16" ID x 25'
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/4"
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 1/4 x 1/4-18
Couldn't load pickup availability
Crimp-On Hose Coupling 3/8" x 9/16-18
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
Product Description
• Black synthetic rubber tube with neoprene cover• Multi-spiral reinforcement
• Supplied in 50-foot rolls
• Easy to assemble, reusable hose ends
• Brass material offers excellent corrosion resistance
• Meets SAE Specification J1402
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Use on air brake hose lines
Assembly information
1. Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.
3. Screw nut until contact is made with body hex.
Technical Specifications
| Item#: | 83892 |
|---|---|
| Category/Performance | Air Brake Hose - Rubber |
| I.D. | 3/8 " |
| Size | 3/8-ID 3/4 |
| Industry Rating 1 | SAE J1402, Type A |
| Industry Rating 2 | DOT FMVSS 106 |
| Working Pressure | 225 PSI |
| O.D. | 3/8 " |
| Burst Pressure | 900 PSI |
| Temperature | -40F to +200F |
| Hose Reinforcement | 4 Spiral Polyester Yarn |
| Hose Cover Material | EPDM, RMA Class C |
| Inner Tube Material | EPDM, RMA Class C |
| UNSPSC #: | 25171700 |
| TAA Compliant: | Yes |
| Weight: | 8.61 lb |
Product Restrictions
