Band-It Clamp, Galvanized High-Carbon Steel, 2-1/2" ID, 5/8" Width, 1/32" Thickness
(Pack of
10)
SKU:81192 Item#: 81192
• Made of high-carbon electrolytic galvanized steel to resist corrosion• 1/32" thick band
• Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Frequently Bought Together
Super 77 Hose Clamp SS 1-3/4 to 2-5/8"
Couldn't load pickup availability
Hose Clamp 304 SS 2-1/16 to 3"
Couldn't load pickup availability
Super 77 Hose Clamp SS 7/16 to 7/8"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability
Ball Check Grease Fitting 90°
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/4"
Couldn't load pickup availability
Super 77 Hose Clamp SS 1-3/4 to 2-5/8"
Couldn't load pickup availability
Hose Clamp 304 SS 2-1/16 to 3"
Couldn't load pickup availability
Super 77 Hose Clamp SS 7/16 to 7/8"
Couldn't load pickup availability
DOT Elbow Male Nylon 3/8 x 1/4-18
Couldn't load pickup availability
Pipe Coupling Brass 3/8-18 x 3/8-18
Couldn't load pickup availability
Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Product Description
• Made of high-carbon electrolytic galvanized steel to resist corrosion• 1/32" thick band• Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Technical Specifications
| Item#: | 81192 |
|---|---|
| Category | Band-It Clamp |
| Applications | Industrial Hose Assemblies and General Applications |
| Material | Galvanized High-Carbon Steel |
| Size | 2-1/2 " |
| I.D. | 2-1/2 " |
| Minimum Diameter | 2-1/2 " |
| Band Width | 5/8 " |
| Width | 5/8 " |
| Thickness | 1/32 " |
| UNSPSC #: | 31162906 |
| TAA Compliant: | Yes |
| Weight: | 1.24 lb |
Product Restrictions
