CryoBore 11/16" Dia. Annular Cutter, 1-3/16" Cutting Depth
(Pack of
1)
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds
• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
High-Performance M2-AL Annular Cutter 1-9/16"
Couldn't load pickup availability
HSS Annular Cutter 2-5/16"
Couldn't load pickup availability
9/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
HSS Annular Cutter 1"
Couldn't load pickup availability
Cut-Off Wheel for Right Angle Grinder 4-1/2"
Couldn't load pickup availability
3/32" Fractional Drill Bit, Jobber Length, No Flats
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Hex Nut Grade 5 Steel 1/4-20
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Product Description
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY81863200 |
|---|---|
| Cutting Diameter | 11/16 " |
| Depth of Cut | 1-3/16 " |
| Tooth Material | Moly/Cobalt |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.195 lb |
Product Restrictions
