D1 Portable Magnetic Drill, Exposed Motor Cord, Adjustable Cutter Guard, 2" Depth of Cut, 3/4" Arbor Bore, 1.3HP 920W Motor
(Pack of
1)
SKU:64662 Item#: 64662
Steelmax® D1 has higher power, weighs less, and has more features than any drill in its class. Steelmax® D1 accepts up to 1-3/8" dia. cutters with a 2" maximum depth of cut.
• New exposed motor cord
• Ultra compact 14-13/16" working height (with coolant bottle)
• Adjustable cutter guard with built-in chip breaker
• Through-spindle coolant system with removable reservoir
• Little maintenance with no gib adjustment and extreme accuracy
• Fewer parts result in less run-out
• “Safe Magnet” circuitry recognizes magnetic holding power
• Spring slug-ejecting arbor system
• Magnet uses 50% power when motor is not under load
• Advance motor for easy field service
D1 Specifications
• Height: 14-13/16" maximum; 12-1/16" minimum
• Width: 6-3/8"
• Length: 9-1/2"
• Weight: 22 lbs.
• Motor: 1.3 hp 920W (single phase); 120V/350 RPM (load)
• Arbor bore: 3/4"
• Drill point breakaway: 859 lbs.
• Magnetic base: 3-1/8" x 6-5/16" x 1-7/16"
• Magnetic dead lift: 2,135 lbs.
• Cutter dia. (maximum): 1-3/8"
• Depth of cut (maximum): 2"
• Centerline pilot to magnet face: 1-9/16"
• Centerline pilot to motor face: 2-3/8"
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold; insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 11/64"
Couldn't load pickup availability
D2X Portable Magnetic Drill 2" Depth of Cut
Couldn't load pickup availability
Morse Taper Drill Adapter
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
180-degree Wide Beam Head Light with Side Light
Couldn't load pickup availability
7-1/4" Circular Saw 3500rpm 13A Motor
Couldn't load pickup availability
14" Chop Saw 1450rpm 15A Motor
Couldn't load pickup availability
Motor Brush Holder for 7-1/4" Circular Saw
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
Couldn't load pickup availability
11Pc Lock and Load Hammer Set
Couldn't load pickup availability
Universal Socket Set, SAE, 1/2" Drive, 6pc
Couldn't load pickup availability
Product Description
Steelmax® D1 has higher power, weighs less, and has more features than any drill in its class. Steelmax® D1 accepts up to 1-3/8" dia. cutters with a 2" maximum depth of cut.• New exposed motor cord
• Ultra compact 14-13/16" working height (with coolant bottle)
• Adjustable cutter guard with built-in chip breaker
• Through-spindle coolant system with removable reservoir
• Little maintenance with no gib adjustment and extreme accuracy
• Fewer parts result in less run-out
• “Safe Magnet” circuitry recognizes magnetic holding power
• Spring slug-ejecting arbor system
• Magnet uses 50% power when motor is not under load
• Advance motor for easy field service
D1 Specifications
• Height: 14-13/16" maximum; 12-1/16" minimum
• Width: 6-3/8"
• Length: 9-1/2"
• Weight: 22 lbs.
• Motor: 1.3 hp 920W (single phase); 120V/350 RPM (load)
• Arbor bore: 3/4"
• Drill point breakaway: 859 lbs.
• Magnetic base: 3-1/8" x 6-5/16" x 1-7/16"
• Magnetic dead lift: 2,135 lbs.
• Cutter dia. (maximum): 1-3/8"
• Depth of cut (maximum): 2"
• Centerline pilot to magnet face: 1-9/16"
• Centerline pilot to motor face: 2-3/8"
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold; insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 64662 |
|---|---|
| Manufacturer Model #: | D1 |
| Type | Magnetic Drill |
| Cutter Diameter | 1-3/8 " |
| Depth of Cut | 2 " |
| Arbor Bore | 3/4 " |
| Drill Point Breakaway | 859 lb |
| Magnetic Dead Lift | 2,135 lb |
| Magnetic Base | 3-1/8" x 6-5/16" x 1-7/16" |
| Centerline Pilot to Motor Face | 2-3/8 " |
| Centerline Pilot to Magnet Face | 1-9/16 " |
| Motor | 1.3 hp 920W (single phase); 120V/350 RPM (load) |
| Length | 9-1/2 " |
| Width | 6-3/8 " |
| Height | 14-13/16" maximum; 12-1/16" minimum |
| Weight | 22 lb |
| UNSPSC #: | 23241801 |
| TAA Compliant: | Yes |
| Weight: | 29.0 lb |
