DOT Air Brake Compression Sleeve for Nylon Tubing, Brass, 1/4"
(Pack of
10)
Create secure, leak-proof connections effortlessly with our brass compression sleeve. Designed for use with copper, brass, and aluminum tubing, this DOT fitting sleeve works seamlessly with a compression nut and fitting to form a watertight seal in low-pressure systems like air, oil, and water lines. Its innovative design eliminates the need for flaring tools—just tighten the nut, and the sleeve locks snugly between the fitting body and nut for a dependable seal. Perfect for plumbing, fuel lines, and various industrial applications, it’s your go-to solution for reliable and efficient pipe connections.
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
DOT Compression Union Brass 3/8"
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 1/4 x 1/8"
Couldn't load pickup availability
DOT Compression Elbow Male 45° Brass 3/8 x 1/4"
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
Couldn't load pickup availability
DOT Union Brass 1/2 x 1/2"
Couldn't load pickup availability
DOT Elbow Male Nylon 3/8 x 1/4-18
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/4-18
Couldn't load pickup availability
DOT Elbow Male Nylon 1/4 x 1/8-27
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 1/4"
Couldn't load pickup availability
DOT Union Brass 3/8 x 3/8"
Couldn't load pickup availability
Hex Head Plug Brass 3/8-18 Male NPT
Couldn't load pickup availability
Miniature Clamp SS 7/32 to 5/8"
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Nylon Cable Tie 4" Black
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Product Description
Create secure, leak-proof connections effortlessly with our brass compression sleeve. Designed for use with copper, brass, and aluminum tubing, this DOT fitting sleeve works seamlessly with a compression nut and fitting to form a watertight seal in low-pressure systems like air, oil, and water lines. Its innovative design eliminates the need for flaring tools—just tighten the nut, and the sleeve locks snugly between the fitting body and nut for a dependable seal. Perfect for plumbing, fuel lines, and various industrial applications, it’s your go-to solution for reliable and efficient pipe connections.• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 84321 |
|---|---|
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Compression Sleeve |
| Connection Type A | Tube |
| Fitting Dimension A | 1/4 " |
| Size | 1/4 |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.02 lb |
Product Restrictions
