Drive Anchor For Concrete, Alloy Steel, Zinc Finish 1/4" x 2"
(Pack of
25)
SKU:64552 Item#: 64552
• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Product Description
• Made of high-strength heat-treated alloy steel with zinc plating• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Technical Specifications
| Item#: | 64552 |
|---|---|
| Diameter | 1/4 " |
| Length | 2 " |
| Hole Diameter | 1/4 " |
| Type | Drive Anchors |
| Minimum Embedment | 1-1/8 " |
| Material | Steel |
| Ultimate Load In 3,000 PSI Concrerte | 2,010 lb |
| Finish | Zinc |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 0.76 lb |
