Home Anchors Expansion Shield Anchor 3/8"
Anchors
DV_ZoomOriginal_P_2288_WB.jpg
DV_ZoomOriginal_P_2288_WB.jpg

Expansion Shield Anchor, 11/16" Drill Size, 3/8"
(Pack of 10)

Item#: 96960

Forway®

• Evenly distributed four-way expansion of anchor wall by internal nut
• Excellent holding power in concrete, brick, stone and cinder block
• Corrosion-resistant, non-deteriorating zinc alloy casting bends and conforms without fracturing
• Meets GSA Specification FF-S-325 3.2.2.2.1.3
• Use for anchoring medium and heavy loads in solid and hollow-base materials
• Typical applications: Guard rails, fascia, equipment hangers, straps, conduit, overhead plumbing installations and suspended heating and air conditioning ductwork
1. Drill hole to at least shield length.
2. Clean hole with air or wet swab.
3. Place Forway® Expansion Shield in the hole.
4. Position fixture or equipment.
5. Insert screw or bolt through equipment into shield and tighten.
NOTE: Screws not included.
Forway® is a registered trademark of U.S.E. Diamond, Inc.
Tensile strength, shear strength and tensile block values shown; a 4:1 safety factor is recommended.

Read More
Check Availability

Catalog page#: 6-31

Frequently Bought Together

DV_ZoomOriginal_P_625.jpg

Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"

Item#: 25141
DV_ZoomOriginal_P_625.jpg

Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"

Item#: 25145
DV_ZoomOriginal_P_41501_WB.jpg

Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/2"

Item#: 91618
DV_ZoomOriginal_P_609_WB.jpg

Pin Drive Expansion Anchor Steel 1/2 x 6"

Item#: 59618
DV_ZoomOriginal_P_609_WB.jpg

Pin Drive Expansion Anchor Steel 5/8 x 4"

Item#: 59619
DV_ZoomOriginal_P_609_WB.jpg

Pin Drive Expansion Anchor Steel 5/8 x 6"

Item#: 59621
DV_ZoomOriginal_P_31311.jpg

Hex Nut Grade 8 Alloy Steel 3/8-16

Item#: A102
DV_ZoomOriginal_P_33479.jpg

SAE J995C Locknut with Nylon Insert Grade 8 1/2-13

Item#: 53983
DV_ZoomOriginal_I_88441.jpg

SAE Flat Washer Thru-Hardened Steel 5/8"

Item#: 88441
DV_ZoomOriginal_I_92822_WB.jpg

Butt Connector 22 to 18 AWG Red

Item#: 92822
DV_ZoomOriginal_I_88437.jpg

SAE Flat Washer Thru-Hardened Steel 3/8"

Item#: 88437
DV_ZoomOriginal_I_DA6152.jpg

Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can

Item#: DA6152

Product Description

• Evenly distributed four-way expansion of anchor wall by internal nut
• Excellent holding power in concrete, brick, stone and cinder block
• Corrosion-resistant, non-deteriorating zinc alloy casting bends and conforms without fracturing
• Meets GSA Specification FF-S-325 3.2.2.2.1.3
• Use for anchoring medium and heavy loads in solid and hollow-base materials
• Typical applications: Guard rails, fascia, equipment hangers, straps, conduit, overhead plumbing installations and suspended heating and air conditioning ductwork
1. Drill hole to at least shield length.
2. Clean hole with air or wet swab.
3. Place Forway® Expansion Shield in the hole.
4. Position fixture or equipment.
5. Insert screw or bolt through equipment into shield and tighten.
NOTE: Screws not included.
Forway® is a registered trademark of U.S.E. Diamond, Inc.
Tensile strength, shear strength and tensile block values shown; a 4:1 safety factor is recommended.

Technical Specifications

Item#: 96960
Anchor Size 3/8 "
Type Forway Expansion Shield Anchor
Drill Size 11/16 "
3,000 PSI Concrete Shear Strength 3,850 lb
Tensile Block 2,440 lb
Thread Pitch 16
3,000 PSI Concrete Tensile Strength 3,640 lb
UNSPSC #: 31162101
TAA Compliant: Yes
Weight: 0.74 lb

Suggested Products

Your Recently Viewed Items