Flap Band, Use on Die Grinder, Deburring, Grinding at 90° Angle, Zirconium Grain, 80 Grit, 2-1/2" Diameter, 1-3/16" Width
(Pack of
1)
SKU:28106 Item#: 28106
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
Catalog page#: 12-22
Frequently Bought Together
1" Dia. X 1" Wide, Flap Wheel, 80 Grit, 1/4" Shank
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
3"X1"X1/4" Lions Tongue Stem Mounted 320 Grit Flap Wheel - Fine
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/16"
Couldn't load pickup availability
1/2" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability
Stemmed Crimped Wire Wheel 3"
Couldn't load pickup availability
1" Dia. X 1" Wide, Flap Wheel, 60 Grit, 1/4" Shank
Couldn't load pickup availability
Flap Band 1-3/4"
Couldn't load pickup availability
3" Dia. x 1" Wide Flap Wheel 120 Grit, 1/4" Shank Dia.
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 5/16-18
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Cable Tie 11.41" Black
Couldn't load pickup availability
Screwdriver Anti Slip Phillips No 2 X 4In
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/16"
Couldn't load pickup availability
Product Description
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 28106 |
|---|---|
| Type | Flap Band |
| Diameter | 2-1/2 " |
| Width | 1-3/16 " |
| Grit | 80 |
| Maximum RPM | 12,700 |
| Grain | Zirconium |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191507 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
