Flap Band 3-1/2"
(Pack of
1)
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
Zirconium grain
One-step grinding and finishing
Very aggressive stock removal
For use on a die grinder
Applications:
Finishing weld seams
Deburring
Rust and scale removal
Grinding at 90° angle
Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together

Mounted Flap Wheel 2"
Couldn't load pickup availability

2"X1"X1/4" Lions Tongue Stem Mounted 80 Grit Flap Wheel - Coarse
Couldn't load pickup availability

Premium Grinding Wheel 4-1/2"
Couldn't load pickup availability

Twist-On Surface Conditioning Disc 2" Blue
Couldn't load pickup availability

Mechanic's Length Drill Bit HSS 1/8"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 11/64"
Couldn't load pickup availability

Flap Band 2-1/2"
Couldn't load pickup availability

3" Dia. x 1" Wide Flap Wheel 120 Grit, 1/4" Shank Dia.
Couldn't load pickup availability

Unmounted Flap Wheel 4"
Couldn't load pickup availability

Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability

Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability

Alu-Master 8-Way Torpedo Level
Couldn't load pickup availability

3/8" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability

Jobber Length Drill Bit HSS 13/32"
Couldn't load pickup availability
Product Description
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product. Zirconium grain
One-step grinding and finishing
Very aggressive stock removal
For use on a die grinder
Applications:
Finishing weld seams
Deburring
Rust and scale removal
Grinding at 90° angle
Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
Item#: | 28109 |
---|---|
Type | Flap Band |
Diameter | 3-1/2 " |
Width | 1-3/16 " |
Grit | 80 |
Maximum RPM | 7,600 |
Grain | Zirconium |
Aluminum Approved | Yes |
UNSPSC #: | 31191507 |
TAA Compliant: | Yes |
Weight: | 0.14 lb |
Product Restrictions



