Heat Shrink Tubing 18 to 12 AWG Clear
(Pack of
10)
• 2.5:1 shrink ratio
• Medium wall thickness fills the void between thin wall and heavy wall tubing
• Outer wall of tubing is high grade polyolefin with an inner wall of adhesive sealant
• Heat-activated sealant provides moisture-tight seal
• 6" lengths
• Meets MIL-1-23053/4 Specification
• Dielectric strength: 1,000V/mil
• Low-temperature flexibility: Four hours at –67°F (–55°C)
• Maximum continuous operating temperature: 230°F (110°C)
• Non-corrosive
• Non-nutrient – fungus resistant
• Excellent fluid resistance
• Rated at 600V
• Clear tubing allows visual inspection of wire and terminal• Tensile strength: 2,200 PSI• Elongation: 500%• Volume resistivity: 1015 Ohm/cm• Heat shock: Four hours at 482°F (250°C)• Longitudinal change: Less than 5%• Not flame-retardant• Secant modulus: 27,000 PSI
• Perfect for light-duty applications where heavy wall isn’t needed
• Use over wire markers for permanent identification
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Frequently Bought Together
Ring Tongue Terminal 16 to 14 AWG Blue
Couldn't load pickup availability
Tru-Shrink Heat Shrink Tubing 18 to 14 AWG Red
Couldn't load pickup availability
Master Security Bit Set 203Pc
Couldn't load pickup availability
Rubber Grommet 5/8" ID
Couldn't load pickup availability
Product Description
• 2.5:1 shrink ratio• Medium wall thickness fills the void between thin wall and heavy wall tubing
• Outer wall of tubing is high grade polyolefin with an inner wall of adhesive sealant
• Heat-activated sealant provides moisture-tight seal
• 6" lengths
• Meets MIL-1-23053/4 Specification
• Dielectric strength: 1,000V/mil
• Low-temperature flexibility: Four hours at –67°F (–55°C)
• Maximum continuous operating temperature: 230°F (110°C)
• Non-corrosive
• Non-nutrient – fungus resistant
• Excellent fluid resistance
• Rated at 600V
• Clear tubing allows visual inspection of wire and terminal• Tensile strength: 2,200 PSI• Elongation: 500%• Volume resistivity: 1015 Ohm/cm• Heat shock: Four hours at 482°F (250°C)• Longitudinal change: Less than 5%• Not flame-retardant• Secant modulus: 27,000 PSI
• Perfect for light-duty applications where heavy wall isn’t needed
• Use over wire markers for permanent identification
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Technical Specifications
| Item#: | 89465 |
|---|---|
| Type | Pre-Cut |
| Style | Dual Wall |
| Wire Gauge Coverage | 18-12 AWG |
| Length | 6 " |
| Color | Clear |
| I.D. Before Shrinkage | .290 " |
| I.D. After Shrinkage | .080 " |
| Shrink Ratio | 2.5 to 1 |
| Wall Thickness After Shrinkage | 0.047 " |
| Dielectric Strength | 1000 V/mm |
| Voltage Rating | 600 V |
| Elongation | 500 % |
| Tensile Strength | 2,200 PSI |
| Heat Shock | 4 hours at 482 degrees F |
| Secant Modulus | 27,000 PSI |
| Longitudinal Change | Less than 5% |
| Approvals | Meets MIL-1-23053/4 Specification |
| UNSPSC #: | 39121723 |
| TAA Compliant: | Yes |
| Weight: | 0.23 lb |
Product Restrictions
