Home Fasteners Bolts Cap Screws Hex Cap Screw Grade 9 Alloy Steel 3/4-16 x 2-3/4"
Bolts
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg

Hex Cap Screw, Grade 9, Alloy Steel, Zinc Finish, Fine Thread, 9/16" Head Height, 1-1/8" Across Flats, 3/4-16 x 2-3/4"
(Pack of 25)

Item#: A918

Tru-Torq®

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Read More
Check Availability
Usually Ships: Today
While Supplies Last

Frequently Bought Together

DV_ZoomOriginal_P_30579_WB.jpg

Hex Cap Screw Grade 8 5/16-18 x 1"

Item#: FA68017
DV_ZoomOriginal_P_41097_WB.jpg

Hex Cap Screw Grade 8 Alloy Steel 3/8-16 x 1"

Item#: 632
DV_ZoomOriginal_I_FA65032_WB.jpg

Hex Cap Screw Grade 5 3/8-16 x 1"

Item#: FA65032
DV_ZoomOriginal_P_30579_WB.jpg

Hex Cap Screw Grade 8 5/16-18 x 1"

Item#: FA68017
DV_ZoomOriginal_P_41097_WB.jpg

Hex Cap Screw Grade 8 Alloy Steel 3/8-16 x 1"

Item#: 632
DV_ZoomOriginal_I_FA65032_WB.jpg

Hex Cap Screw Grade 5 3/8-16 x 1"

Item#: FA65032
DV_ZoomOriginal_I_FA88447.jpg

USS Flat Washer Thru-Hardened Steel 3/8"

Item#: FA88447
DV_ZoomOriginal_I_88436.jpg

SAE Flat Washer Thru-Hardened Steel 5/16"

Item#: 88436
DV_ZoomOriginal_P_506_WB.jpg

Self-Drilling Screw Hex Head 1/4-14 x 1"

Item#: 2539
DV_ZoomOriginal_P_32673.jpg

Hex Nut Grade 5 Steel 1/4-20

Item#: FA95677
DV_ZoomOriginal_P_31311.jpg

Hex Nut Grade 8 Alloy Steel 5/8-11

Item#: A106
DV_ZoomOriginal_P_31311.jpg

Hex Nut Grade 8 Alloy Steel 5/16-18

Item#: A101
DV_ZoomOriginal_I_1495188.jpg

Stepdown Butt Connector 22 to 18/16 to 14 AWG

Item#: 1495188
DV_ZoomOriginal_I_DY80000105.jpg

Waterproof Work Aqua Light 66 LED

Item#: DY80000105
DV_ZoomOriginal_I_92822_WB.jpg

Butt Connector 22 to 18 AWG Red

Item#: 92822
DV_ZoomOriginal_I_DY80000351.jpg

Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs

Item#: DY80000351
DV_ZoomOriginal_I_FA5108.jpg

Screwdriver Master Bit Set, S2 Tool Steel, 100pc

Item#: FA5108
DV_ZoomOriginal_P_3564.jpg

Double Spiral Tube Brush 3/4"

Item#: 92009
DV_ZoomOriginal_I_DY80000351.jpg

Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs

Item#: DY80000351
DV_ZoomOriginal_I_FA5108.jpg

Screwdriver Master Bit Set, S2 Tool Steel, 100pc

Item#: FA5108
DV_ZoomOriginal_P_3564.jpg

Double Spiral Tube Brush 3/4"

Item#: 92009

Product Description

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Technical Specifications

Item#: A918
Style Premium
Diameter 3/4 "
Thread Pitch 16
Thread Fine
Length 2-3/4 "
Type Hex Cap Screw
Across Flats 1-1/8 "
Material Alloy Steel
Grade 9
Finish Bright Zinc
Tensile Strength 180,000 PSI
Head Style High Hex
Head Height 9/16 "
Thread Form UNJ
Thread Length Partial
Thread Length Minimum 1-3/4 "
UNSPSC #: 31161501
TAA Compliant: Yes
Weight: 11.92 lb

Suggested Products

DV_ZoomOriginal_P_41097_WB.jpg

Hex Cap Screw Grade 8 Alloy Steel 3/8-16 x 1-1/2"

Item#: 634
DV_ZoomOriginal_I_FA68034_WB.jpg

Hex Cap Screw Grade 8 3/8-16 x 1-1/2"

Item#: FA68034
DV_ZoomOriginal_P_30579_WB.jpg

Hex Cap Screw Grade 8 1/4-20 x 1"

Item#: FA68002
DV_ZoomOriginal_P_41097_WB.jpg

Hex Cap Screw Grade 8 Alloy Steel 1/4-20 x 1"

Item#: 602
DV_ZoomOriginal_P_30579_WB.jpg

Hex Cap Screw Grade 8 5/8-11 x 2"

Item#: FA68098
DV_ZoomOriginal_P_30579_WB.jpg

Hex Cap Screw Grade 8 3/8-16 x 1-1/4"

Item#: FA68033
DV_ZoomOriginal_P_30579_WB.jpg

Hex Cap Screw Grade 8 1/2-13 x 1-1/2"

Item#: FA68062
DV_ZoomOriginal_I_FA65002_WB.jpg

Hex Cap Screw Grade 5 1/4-20 x 1"

Item#: FA65002
DV_ZoomOriginal_P_41097_WB.jpg

Hex Cap Screw Grade 8 Alloy Steel 1/4-20 x 3/4"

Item#: 601
DV_ZoomOriginal_P_30579_WB.jpg

Hex Cap Screw Grade 8 3/8-16 x 1"

Item#: FA68032
DV_ZoomOriginal_I_FA65034_WB.jpg

Hex Cap Screw Grade 5 3/8-16 x 1-1/2"

Item#: FA65034
DV_ZoomOriginal_P_41097_WB.jpg

Hex Cap Screw Grade 8 Alloy Steel 5/16-18 x 1"

Item#: 617

Your Recently Viewed Items