Home Anchors Hi-Load Masonry Anchor Steel M10 x 100mm
Anchors
DV_ZoomOriginal_P_41498_WB.jpg
DV_ZoomOriginal_P_41498_WB.jpg

Hi-Load Masonry Anchor, Hex Bolt, Steel, Dichromate Zinc Finish, 14mm Drill Size, M10 x 100mm
(Pack of 2)

Item#: 50504

Lawson Products

• 8.8 metric grade steel with yellow dichromate zinc plating
• Exceptional strength coupled with the ability to resist vibratory loads
• Designed to equally distribute force to all sides
• Center plastic ring prevents anchor from spinning during installation
• Stud version can be adjusted for standoff height (shimming and leveling)
• Hex bolt version for applications where a finished appearance is required
• Removable; no cutting required
• Collapsible sleeve allows for secure clamping force
• Heavy-duty expansion sleeve provides follow-up expansion for fastening in tension zones of concrete such as under bridge decks, floor slabs and beams
• Designed for seismic (subject to or caused by an earthquake, vibration, strong impact or earth shaking) and dynamic (constant applied load) applications
• Applications include heavy machinery, conveyors, safety railings, dock bumpers and connecting structural components
Installation Procedure
1. Drill hole to correct diameter and depth.
2. Remove dust and rubble from hole with compressed air and a brush.
3. Using a hammer, tap the anchor through the material to be fastened until the anchor is firmly seated.
4. Tighten the anchor to the specified torque.
*Maximum values shown; use one-fourth of the ultimate tensile and shear capacities for the recommended 4:1 safety factor.

Read More
Check Availability
Usually Ships: Today
While Supplies Last

Frequently Bought Together

DV_ZoomOriginal_P_41605.jpg

Masonry Anchor TORX® Flat Head Steel 1/4 x 2-1/4"

Item#: 96929
DV_ZoomOriginal_P_615_WB.jpg

Wedge Type Stud Bolt Anchor Steel 1/2 x 7"

Item#: 91606
DV_ZoomOriginal_P_41501_WB.jpg

Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/4"

Item#: 91617
DV_ZoomOriginal_P_32671.jpg

Hex Nut Grade 8 Steel 3/8-16

Item#: FA68402
DV_ZoomOriginal_P_1954.jpg

Flat Washer 316 Stainless Steel 3/8"

Item#: 81876
DV_ZoomOriginal_I_FA88435.jpg

SAE Flat Washer Thru-Hardened Steel 1/4"

Item#: FA88435
DV_ZoomOriginal_I_1495189.jpg

Stepdown Butt Connector 16 to 14/12 to 10 AWG

Item#: 1495189
DV_ZoomOriginal_P_1999.jpg

Flat Washer Grade 12 Thru-Hardened Steel M10

Item#: 87511
DV_ZoomOriginal_P_32673.jpg

Hex Nut Grade 5 Steel 3/8-16

Item#: FA95679
DV_ZoomOriginal_P_10907_WB.jpg

Masonry Sleeve Anchor Steel 5/8 x 6"

Item#: P34706
DV_ZoomOriginal_I_25204_WB.jpg

Sleeve Type Stud Bolt Anchor Steel 3/8 x 4"

Item#: 25209
DV_ZoomOriginal_I_25204_WB.jpg

Sleeve Type Stud Bolt Anchor Steel 1/4 x 3"

Item#: 25205

Product Description

• 8.8 metric grade steel with yellow dichromate zinc plating
• Exceptional strength coupled with the ability to resist vibratory loads
• Designed to equally distribute force to all sides
• Center plastic ring prevents anchor from spinning during installation
• Stud version can be adjusted for standoff height (shimming and leveling)
• Hex bolt version for applications where a finished appearance is required
• Removable; no cutting required
• Collapsible sleeve allows for secure clamping force
• Heavy-duty expansion sleeve provides follow-up expansion for fastening in tension zones of concrete such as under bridge decks, floor slabs and beams
• Designed for seismic (subject to or caused by an earthquake, vibration, strong impact or earth shaking) and dynamic (constant applied load) applications
• Applications include heavy machinery, conveyors, safety railings, dock bumpers and connecting structural components
Installation Procedure
1. Drill hole to correct diameter and depth.
2. Remove dust and rubble from hole with compressed air and a brush.
3. Using a hammer, tap the anchor through the material to be fastened until the anchor is firmly seated.
4. Tighten the anchor to the specified torque.
*Maximum values shown; use one-fourth of the ultimate tensile and shear capacities for the recommended 4:1 safety factor.

Technical Specifications

Item#: 50504
Length 100 mm
Type Hi-Load Masonry Anchor
Drill Size 14 mm
Material Carbon Steel
Maximum Fastened Material Thickness 25 mm
Reommended Torque 36 ft·lbf
Size M10X100MM mm
Minimum Embedment 73 mm
Ultimate Shear Strength 4,000 PSI Concrete 8,905 lb
Diameter M10
Ultimate Tensile Strength 4,000 PSI Concrete 6,788 lb
UNSPSC #: 31162101
TAA Compliant: Yes
Weight: 0.54 lb

Suggested Products

DV_ZoomOriginal_P_627.jpg

Self-Drilling Wall Anchor 1-5/8"

Item#: 95096
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 1/4 x 1-1/4"

Item#: 96913
DV_ZoomOriginal_I_25192_WB.jpg

Conical Screw Anchor Plastic #10 to #12 x 1"

Item#: 25192
DV_ZoomOriginal_P_2300_WB.jpg

SNAPTOGGLE® Toggle Bolt Anchor 1/4-20

Item#: 90918
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 1/4 x 1-3/4"

Item#: 96914
DV_ZoomOriginal_I_25193_WB.jpg

Conical Screw Anchor Plastic #14 to #16 x 1-3/8"

Item#: 25193
DV_ZoomOriginal_P_2300_WB.jpg

SNAPTOGGLE® Toggle Bolt Anchor 3/16-24

Item#: 90917
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 3/16 x 1-1/4"

Item#: 96906
DV_ZoomOriginal_I_94879.jpg

Conical Screw Anchor Kit Plastic 301Pcs

Item#: 94879
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 3/16 x 1-3/4"

Item#: 96907
DV_ZoomOriginal_P_615_WB.jpg

Wedge Type Stud Bolt Anchor Steel 1/2 x 4-1/4"

Item#: 84032
DV_ZoomOriginal_I_25191_WB.jpg

Conical Screw Anchor Plastic #8 to #10 x 7/8"

Item#: 25191

Your Recently Viewed Items