High Solids Paints, Flat Black, 16oz Aerosol
(Pack of
1)
SKU:1509163 Item#: 1509163
Provides the best coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Industrial Applications – 20 oz. can size; 16 oz. net wt. (1509196 – 20 oz. can size; 15.5 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For use on shop equipment, racks, shelving, assembly lines, motors, safety marking, and more.
NOTE: Actual colors may vary in shade from colors shown here, since they are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 24-49
Frequently Bought Together
High Solids Paint Takeuchi Red
Couldn't load pickup availability
High Solids Paints Fleet White
Couldn't load pickup availability
Inverted Tip Marking Paint Safety Green
Couldn't load pickup availability
Silicone Lubricant 10oz
Couldn't load pickup availability
High Solids Paints OSHA Yellow
Couldn't load pickup availability
High Solids Paints New Equipment Yellow
Couldn't load pickup availability
High Solids Paint Takeuchi Red
Couldn't load pickup availability
Liquid Vinyl Tape 4fl.oz
Couldn't load pickup availability
High Solids Paints Fleet White
Couldn't load pickup availability
MINI Fuse 20A Yellow
Couldn't load pickup availability
Persist High Temperature Bentonite Grease 14oz
Couldn't load pickup availability
ATO/ATC Fuse 15A Blue
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
ATO/ATC Fuse 10A Red
Couldn't load pickup availability
MINI Fuse 10A Red
Couldn't load pickup availability
PTFE Pipe Thread Seal White 1/2 x 260"
Couldn't load pickup availability
PTFE Pipe Thread Seal White 1/2 x 260"
Couldn't load pickup availability
DOT Union Nylon 1/4 x 1/4"
Couldn't load pickup availability
High Solids Paints Gloss White
Couldn't load pickup availability
Product Description
Provides the best coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Industrial Applications – 20 oz. can size; 16 oz. net wt. (1509196 – 20 oz. can size; 15.5 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For use on shop equipment, racks, shelving, assembly lines, motors, safety marking, and more.
NOTE: Actual colors may vary in shade from colors shown here, since they are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Technical Specifications
| Item#: | 1509163 |
|---|---|
| Type | High Solids Paint |
| Container Type | Aerosol |
| Size | 16 Oz. |
| Basic Color | Black |
| Color | Flat Black |
| Application Temperature | 50 to 90 °F |
| Dry Time (To Touch) | 10 min |
| Dry Time (Tack Free) | 30 min |
| Base Type | Oil |
| Physical Form | Aerosol |
| Cure / Recoat Time | For best results recoat within 1 hour or after 48 hours. |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
| Weight: | 1.5 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
