High Visibility Green Standard Wheel Check 1-3/16" (30mm) - K
(Pack of
100.0)
Wheel-Checks are a loose wheel nut indicator that can identify a loose wheel nut with a simple visual inspection. When the wheel nuts are properly torqued to specs, the Wheel-Checks are then placed on the wheel nuts in a uniform pattern. Once a Wheel Nut has loosened, the Wheel-Check will become out of sequence. If there is a binding brake or seized bearing, the heat is transferred through the stud and nut. If this temperature exceeds 257 ºF, the Wheel-Check will start to blister around the circumference and eventually start to distort. The High Visibility Green assists Drivers in identifying potential maintenance concerns early.
• Provides a simple, visual means of confirming proper wheel torque in seconds
• Quickly identify a hot wheel possibly caused by bearing failure or brake drag
• Facilitates official roadside inspections
• Clearly visible at night and in bad weather (rain, snow, muddy conditions)
• Reusable
• Torque wheel nuts to proper specifications (recommended ft/lb)
• Ensure correct size by measuring unit from flat to flat
• Place one Wheel-Check over each nut with the raised collar towards the wheel
• Hold the arrow of the indicator pointing in your preferred pattern
• Push the Wheel-Checks on with a socket wrench or PVC pipe
• For disc wheel, point the point to the center following stud in a clockwise rotation
• For other wheel types, point indicators towards the hub
Frequently Bought Together
Front and Rear Bumper Fascia Retainer Plastic 1"
Couldn't load pickup availability
Shroud Insulating Button Nylon 11/16"
Couldn't load pickup availability
Bumper Cover and Fender Shield Push-Type Retainer
Couldn't load pickup availability
Tire Patch Cement 8oz Chemical
Couldn't load pickup availability
MCN Series Lead Clip-On Wheel Weight 3/4 oz
Couldn't load pickup availability
Rear Bumper Cover Retainer Plastic 18mm
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
PZ Series Zinc Clip-On Wheel Weight 1/4oz
Couldn't load pickup availability
P Series Lead Clip-On Wheel Weight 1-1/4oz
Couldn't load pickup availability
TN Series Lead Clip-On Wheel Weight 1-1/4oz
Couldn't load pickup availability
M12-1.25 Acorn Wheel Nut
Couldn't load pickup availability
M14-1.50 Flattop Wheel Nut
Couldn't load pickup availability
Metric Wheel Nut Steel Outer M12 x 1.25 R 16mm
Couldn't load pickup availability
Product Description
Wheel-Checks are a loose wheel nut indicator that can identify a loose wheel nut with a simple visual inspection. When the wheel nuts are properly torqued to specs, the Wheel-Checks are then placed on the wheel nuts in a uniform pattern. Once a Wheel Nut has loosened, the Wheel-Check will become out of sequence. If there is a binding brake or seized bearing, the heat is transferred through the stud and nut. If this temperature exceeds 257 ºF, the Wheel-Check will start to blister around the circumference and eventually start to distort. The High Visibility Green assists Drivers in identifying potential maintenance concerns early.• Provides a simple, visual means of confirming proper wheel torque in seconds
• Quickly identify a hot wheel possibly caused by bearing failure or brake drag
• Facilitates official roadside inspections
• Clearly visible at night and in bad weather (rain, snow, muddy conditions)
• Reusable
• Torque wheel nuts to proper specifications (recommended ft/lb)
• Ensure correct size by measuring unit from flat to flat
• Place one Wheel-Check over each nut with the raised collar towards the wheel
• Hold the arrow of the indicator pointing in your preferred pattern
• Push the Wheel-Checks on with a socket wrench or PVC pipe
• For disc wheel, point the point to the center following stud in a clockwise rotation
• For other wheel types, point indicators towards the hub
Technical Specifications
| Item#: | 1677374 |
|---|---|
| Material | Virgin Polymer |
| Color | Green |
| Maximum Temperature | 257 °F |
| Quantity Per Package | 100 ea. |
| TAA Compliant: | Yes |
Product Restrictions
