HSS Combination Drill-Tap M5
(Pack of
1)
Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
118° spiral point
Three positive driving flats on the shank
Neck is reduced below minor diameter for added clearance
Made of M1 high-speed steel
Made in USA
Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together

HSS Combination Drill-Tap 1/4-20
Couldn't load pickup availability

HSS Combination Drill-Tap 10-32
Couldn't load pickup availability

Cryo-Drap #6-32 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability

Scotch-Brite Roloc Surface Conditioning Disc 2"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 5/16"
Couldn't load pickup availability

Mechanic's Length Drill Bit Set 29Pcs
Couldn't load pickup availability

Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability

IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability

Cryotap 5/16"-18 Taper Hand Tap
Couldn't load pickup availability

Cryotap 1/4"-20 Taper Hand Tap
Couldn't load pickup availability

4-Flute HSS Bottoming Hand Tap M12 x 1.75
Couldn't load pickup availability

Jobber Length Drill Bit HSS 9/64"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 5/32"
Couldn't load pickup availability

Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Product Description
Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole 118° spiral point
Three positive driving flats on the shank
Neck is reduced below minor diameter for added clearance
Made of M1 high-speed steel
Made in USA
Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
Item#: | 27380 |
---|---|
Type | Combination Drill Tap |
Point | 118° Split |
Diameter | M5 |
Pitch | 0.8 mm |
Tap Length | 0.5000 " |
Material Thickness | 3/8 " |
Material | HSS |
Overall Length | 2.98 " |
UNSPSC #: | 23241615 |
TAA Compliant: | Yes |
Weight: | 0.02 lb |
Product Restrictions



