Inline One-Way Flow Control Regulator, Nylon, 12 x 12 mm, Tube x Tube, 15 to 145PSI
(Pack of
1)
SKU:62253P Item#: 62253P
In-Line Flow Control Regulators can be easily added to existing circuitry. Simply splice it into the cylinder port line. They may be used individually or, they may be stacked together using two joining clips, supplied with each valve. Panel mounting is accomplished by using the through holes in the molded body. Adjustment CharacteristicsControl is achieved gradually due to the extreme sensitivity of the adjustment screw, which allows exceptionally fine setting levels. With the use of a locking nut, the in-line flow control may be secured in its final setting. Settings are maintained even under adverse conditions such as vibration. A captive adjustment screw prevents loss or dangerous blow out. Full Flow In Both Directions Intake capacity is always slightly greater than the full open exhaust capacity, enabling maximum variation of speeds between outward and return strokes. Designed To Be VersatileLegris in-line flow controls are unidirectional flow control valves. Intake air flows freely through the flow control; exhaust air is metered out through a specially designed adjustment screw. An arrow on the body of the valve indicates the direction of controlled flow.
• Working temperature: 30°F to +160°F
• Working pressure: 15 to 145 PSI
• Sutable fluids: Compressed air
• Construction:
– Body: Glass-reinforced nylon 6.6 or brass
– Gripping ring: Stainless steel
– Adjustment screw: Nickel-plated brass
– Locking nut: Nickel-plated brass
– Base: Nickel-plated brass with thread sealant on tapered components
Photos are representations of product.
CAUTION: These fitting systems are not D.O.T. approved. Do not use for air brake connections.
Frequently Bought Together
Merchant Coupling Steel 3/4-14 x 3/4-14
Couldn't load pickup availability
Pipe Street Elbow Brass 45° 1/8-27 x 1/8-27
Couldn't load pickup availability
Push-to-Connect Elbow, Nickel-Plated Brass/PBT Resin, 1/4 x 1/4"
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/4"
Couldn't load pickup availability
Pipe Coupling Brass 1/4-18 x 1/4-18
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability
Nylon Hose Guard 0.91" ID x 25' Length
Couldn't load pickup availability
Push-to-Connect Connector, Nickel-Plated Brass/PBT Resin, 5/16 x 1/4"
Couldn't load pickup availability
Push-to-Connect Tee, Nickel-Plated Brass/PBT Resin, 6 x 6 x 6mm
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Product Description
In-Line Flow Control Regulators can be easily added to existing circuitry. Simply splice it into the cylinder port line. They may be used individually or, they may be stacked together using two joining clips, supplied with each valve. Panel mounting is accomplished by using the through holes in the molded body. Adjustment CharacteristicsControl is achieved gradually due to the extreme sensitivity of the adjustment screw, which allows exceptionally fine setting levels. With the use of a locking nut, the in-line flow control may be secured in its final setting. Settings are maintained even under adverse conditions such as vibration. A captive adjustment screw prevents loss or dangerous blow out. Full Flow In Both Directions Intake capacity is always slightly greater than the full open exhaust capacity, enabling maximum variation of speeds between outward and return strokes. Designed To Be VersatileLegris in-line flow controls are unidirectional flow control valves. Intake air flows freely through the flow control; exhaust air is metered out through a specially designed adjustment screw. An arrow on the body of the valve indicates the direction of controlled flow.• Working temperature: 30°F to +160°F
• Working pressure: 15 to 145 PSI
• Sutable fluids: Compressed air
• Construction:
– Body: Glass-reinforced nylon 6.6 or brass
– Gripping ring: Stainless steel
– Adjustment screw: Nickel-plated brass
– Locking nut: Nickel-plated brass
– Base: Nickel-plated brass with thread sealant on tapered components
Photos are representations of product.
CAUTION: These fitting systems are not D.O.T. approved. Do not use for air brake connections.
Technical Specifications
| Item#: | 62253P |
|---|---|
| Manufacturer Model #: | 7770 12 00 |
| Style | Flow Control Regulator |
| Configuration | In-Line One-Way |
| Tube Size | 12 mm |
| Thread Size | 12 mm |
| Material | Nylon |
| Wrench Size | 14 mm |
| Working Pressure | 15 to 145 PSI |
| Temperature Range | 30 to 160 °F |
| UNSPSC #: | 40183100 |
| TAA Compliant: | Yes |
| Weight: | 0.31 lb |
Product Restrictions
