Instant Gasket Maker, Black, Paste Form, 10oz Power Can
(Pack of
1)
SKU:27819 Item#: 27819
Make your own leakproof gaskets in just one minute with Lawson Instant Gasket Maker! Return equipment to service and enhance productivity with this innovative rubber gasket technology that is blow-out resistant and outperforms pre-cut gaskets. It seals instantly, sets quickly and is tack-free in five minutes.
• Can has easy dispensing lever and makes an average of 14 to 18 gaskets
• Resistant to oil, coolant, automatic transmission fluids and gear oil
• Operates in environments to 600°F (315°C) continuous, 650°F (343°C) intermittent
• Meets or exceeds requirements for oxygen sensor equipped engines
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open valve, turn nozzle counterclockwise 1/4 turn and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly “click” the nozzle back into position.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 24-5
Frequently Bought Together
Flexseal Dispense-A-Gasket RTV Silicone Grey 9oz
Couldn't load pickup availability
Flexseal Dispense-A-Sealant RTV Silicone Aluminum
Couldn't load pickup availability
Titan 7242™ Medium Strength Threadlocker Blue 35ml
Couldn't load pickup availability
Moly Coat Dry Film Lubricant 10.25oz
Couldn't load pickup availability
High Solids Paint JLG Orange
Couldn't load pickup availability
High Solids Paints OSHA Red
Couldn't load pickup availability
Fire Stop Sealant Caulk Red 10.1oz
Couldn't load pickup availability
587™ High Performance RTV Silicone Gasket Maker
Couldn't load pickup availability
Fire Stop Sealant Putty Red 20 oz
Couldn't load pickup availability
Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Connector Housing 20A 2-Wire Tower
Couldn't load pickup availability
Quick Disconnect Plug Steel 1/4" x 1/4-18
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
Product Description
Make your own leakproof gaskets in just one minute with Lawson Instant Gasket Maker! Return equipment to service and enhance productivity with this innovative rubber gasket technology that is blow-out resistant and outperforms pre-cut gaskets. It seals instantly, sets quickly and is tack-free in five minutes.• Can has easy dispensing lever and makes an average of 14 to 18 gaskets
• Resistant to oil, coolant, automatic transmission fluids and gear oil
• Operates in environments to 600°F (315°C) continuous, 650°F (343°C) intermittent
• Meets or exceeds requirements for oxygen sensor equipped engines
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open valve, turn nozzle counterclockwise 1/4 turn and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly “click” the nozzle back into position.
Technical Specifications
| Item#: | 27819 |
|---|---|
| Type | Sealant and Caulk |
| Container Type | Power Can |
| Color | Black |
| Size | 10 Oz. |
| Temperature Range | -58 to 392 °F |
| Physical Form | Paste |
| UNSPSC #: | 31201600 |
| TAA Compliant: | Yes |
| Weight: | 0.79 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
