Maintenance Engineered Hacksaw Blade, Bimetal Construction, 12" Length, 26-32TPI
(Pack of
30)
SKU:51226M02 Item#: 51226M02
• Made in USA Variable Pitch
• Teeth vary in size, spacing, gullet depth and number of teeth per inch along the whole length of the blade
• Allows each tooth to enter the workpiece at a different cutting angle than the tooth before it, cutting into the workpiece underneath the cut made by the previous tooth, which makes for better chip formation. This allows you to cut faster and results in a smooth-cut finish
• Less friction results in less heat buildup, particularly when cutting materials such as stainless steel that tend to work-harden easily
• Each variable pitch blade size is able to cut a wider range of thicknesses, materials and shapes than straight pitch blades – reducing time required for blade changesBi-Metal Construction
• A matrix alloy tool steel cutting edge is electronically welded to an alloy spring steel back
• Cuts tough materials up to Rc 45, yet remains shatterproof
• Can be tensioned to 30,000 PSI in a Hardflex® frame for greater performance
• Withstands heavy feed pressures, side pressures and shocks without stripping teeth
• Resists fatigue due to high friction cutting temperatures
• Teeth stay sharper longerWavy Set
• Groups of teeth are offset to the left and right throughout the blade
• Less likely to strip than raker set teeth, because the set extends from below the gullets
• On thin wall material, waviness increases the contact area, giving better accuracy
• Better choice when the workpiece thickness varies, or for thin materials which may catch or bind teeth
• The angle of each tooth changes gradually, thereby increasing the contact area and distributing the load
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Jobber Length Drill Bit HSS 1/2"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/32"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/16"
Couldn't load pickup availability
Cryoflex 15PC Hacksaw Blade Combo Kit,5 each of 18, 24, & 32TPI Blades
Couldn't load pickup availability
Shatterproof Hacksaw Blade 10"
Couldn't load pickup availability
Tungsten Carbide Hacksaw Blade 12"
Couldn't load pickup availability
Reciprocating Saw Blade 12" 14TPI
Couldn't load pickup availability
Reciprocating Saw Blade 6" 10TPI
Couldn't load pickup availability
Reciprocating Saw Blade 9" 18TPI
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/4"
Couldn't load pickup availability
3" Pneumatic Cut-Off Tool
Couldn't load pickup availability
Product Description
• Made in USA Variable Pitch• Teeth vary in size, spacing, gullet depth and number of teeth per inch along the whole length of the blade
• Allows each tooth to enter the workpiece at a different cutting angle than the tooth before it, cutting into the workpiece underneath the cut made by the previous tooth, which makes for better chip formation. This allows you to cut faster and results in a smooth-cut finish
• Less friction results in less heat buildup, particularly when cutting materials such as stainless steel that tend to work-harden easily
• Each variable pitch blade size is able to cut a wider range of thicknesses, materials and shapes than straight pitch blades – reducing time required for blade changesBi-Metal Construction
• A matrix alloy tool steel cutting edge is electronically welded to an alloy spring steel back
• Cuts tough materials up to Rc 45, yet remains shatterproof
• Can be tensioned to 30,000 PSI in a Hardflex® frame for greater performance
• Withstands heavy feed pressures, side pressures and shocks without stripping teeth
• Resists fatigue due to high friction cutting temperatures
• Teeth stay sharper longerWavy Set
• Groups of teeth are offset to the left and right throughout the blade
• Less likely to strip than raker set teeth, because the set extends from below the gullets
• On thin wall material, waviness increases the contact area, giving better accuracy
• Better choice when the workpiece thickness varies, or for thin materials which may catch or bind teeth
• The angle of each tooth changes gradually, thereby increasing the contact area and distributing the load
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 51226M02 |
|---|---|
| Type | Standard |
| Length | 12 " |
| Teeth per Inch | 26-32 |
| Material Thickness | 1/16" and Thinner |
| UNSPSC #: | 27111559 |
| TAA Compliant: | Yes |
| Weight: | 1.35 lb |
Product Restrictions
