Miniature LED Bulb 5W
(Pack of
2.0)
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.
LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Frequently Bought Together
Miniature Turn Signal Lamp Incandescent 24W 12V
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 36CP
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
ATO/ATC Fuse 10A Red
Couldn't load pickup availability
MINI Fuse 15A Blue
Couldn't load pickup availability
Tru-Shrink Heat Shrink Tubing 14 to 6 AWG Black
Couldn't load pickup availability
Stylus® Pen Light LED 3x AAAA 6.21"
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
Couldn't load pickup availability
Inspector Pocket Light LED 180/54/180lm
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-28
Couldn't load pickup availability
Lock And Load Interchangeable Small Punch and Chisel Set, 13pc
Couldn't load pickup availability
1/2" Drive, Cross-Over Deep Socket, 15/16''
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Self-Drilling Screw Hex Head #10-16 x 3/4"
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
Product Description
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Technical Specifications
| Item#: | 1607725 |
|---|---|
| Type | Miniature |
| Light Source | LED |
| Watts | 5 |
| UNSPSC #: | 25172901 |
| TAA Compliant: | Yes |
| Weight: | 0.07 lb |
Product Restrictions
