Gates Power-Grip Heat Shrink Hose Clamp, Thermoplastic, 1-5/16 to 1-1/2" Clamp ID
(Pack of
3)
SKU:56233 Item#: 56233
Stops leaks, even on out-of-round applications. Power-Grip™ hose clamps will conform to any shape of hose and housing.
• Unsurpassed sealing on all types of coolant hose, even silicone
• Easily installed with a standard heat gun
• Clamps expand and contract with the thermal cycling of a vehicle’s coolant system, eliminating cold engine coolant leaks
• Never needs retightening
• Tough thermoplastic material
• Large clamp width covers more surface area, including the bead
• Wide sealing capacity – won’t damage hose
• Maintenance-free – install and forget
• No sharp edges
• Unaffected by oil or other automotive fluids
• Installation instructions included
If a hose falls between sizes, use the smaller clamp.
Frequently Bought Together
Silicone Heater/Coolant Hose Clamp SS 2-1/16 to 3"
Couldn't load pickup availability
Constant Torque Hose Clamp SS 1-1/4 to 2-1/8"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp SS 1-1/16 to 2"
Couldn't load pickup availability
Super 77 Hose Clamp SS 5/8 to 1-1/4"
Couldn't load pickup availability
DOT Connector Male Brass 3/8 x 3/8-18
Couldn't load pickup availability
DOT Compression Connector Male Brass 1/4 x 1/4"
Couldn't load pickup availability
Hose Clamp 304 SS 1-1/16 to 2"
Couldn't load pickup availability
Fuel Line Hose 1/4" ID x 25'
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #12 7/8 to 1-1/4"
Couldn't load pickup availability
Pipe Street Elbow Brass 45° 3/8-18 x 3/8-18
Couldn't load pickup availability
Ball Check Grease Fitting 90°
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/4"
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Product Description
Stops leaks, even on out-of-round applications. Power-Grip™ hose clamps will conform to any shape of hose and housing.• Unsurpassed sealing on all types of coolant hose, even silicone
• Easily installed with a standard heat gun
• Clamps expand and contract with the thermal cycling of a vehicle’s coolant system, eliminating cold engine coolant leaks
• Never needs retightening
• Tough thermoplastic material
• Large clamp width covers more surface area, including the bead
• Wide sealing capacity – won’t damage hose
• Maintenance-free – install and forget
• No sharp edges
• Unaffected by oil or other automotive fluids
• Installation instructions included
If a hose falls between sizes, use the smaller clamp.
Technical Specifications
| Item#: | 56233 |
|---|---|
| Category | Gates Power-Grip Heat Shrink Hose Clamps |
| Applications | Coolant System Hoses |
| Material | Thermoplastic |
| Fits Hose I.D. | 1 " |
| Size | 1-1/2 " |
| I.D. | 1 " |
| Minimum Diameter | 1-3/16 " |
| Maximum Diameter | 1-1/2 " |
| Shrink Range | 1-3/16 - 1-1/2 |
| UNSPSC #: | 31162906 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
Product Restrictions
