Power-Grip Heat Shrink Hose Clamp 13/16 to 15/16"
(Pack of
5.0)
Stops leaks, even on out-of-round applications. Power-Grip™ hose clamps will conform to any shape of hose and housing.
• Unsurpassed sealing on all types of coolant hose, even silicone
• Easily installed with a standard heat gun
• Clamps expand and contract with the thermal cycling of a vehicle’s coolant system, eliminating cold engine coolant leaks
• Never needs retightening
• Tough thermoplastic material
• Large clamp width covers more surface area, including the bead
• Wide sealing capacity – won’t damage hose
• Maintenance-free – install and forget
• No sharp edges
• Unaffected by oil or other automotive fluids
• Installation instructions included
If a hose falls between sizes, use the smaller clamp.
Frequently Bought Together
Super 77 Hose Clamp SS 7/8 to 1-3/4"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 1/2 to 29/32"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #8 5/8 to 15/16"
Couldn't load pickup availability
Hose Clamp 301 SS 3/4 to 1-3/4"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability
Constant Torque Hose Clamp SS 2-1/4 to 3-1/8"
Couldn't load pickup availability
Super 77 Hose Clamp SS 7/8 to 1-3/4"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 1/2 to 29/32"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #8 5/8 to 15/16"
Couldn't load pickup availability
Super 77 Hose Clamp SS 1/2 to 1-1/8"
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 1/4"
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/4-18
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Product Description
Stops leaks, even on out-of-round applications. Power-Grip™ hose clamps will conform to any shape of hose and housing.• Unsurpassed sealing on all types of coolant hose, even silicone
• Easily installed with a standard heat gun
• Clamps expand and contract with the thermal cycling of a vehicle’s coolant system, eliminating cold engine coolant leaks
• Never needs retightening
• Tough thermoplastic material
• Large clamp width covers more surface area, including the bead
• Wide sealing capacity – won’t damage hose
• Maintenance-free – install and forget
• No sharp edges
• Unaffected by oil or other automotive fluids
• Installation instructions included
If a hose falls between sizes, use the smaller clamp.
Technical Specifications
| Item#: | 56230 |
|---|---|
| Category | Gates Power-Grip Heat Shrink Hose Clamps |
| Material | Thermoplastic |
| Fits Hose I.D. | 1/2 " |
| Size | 15/16 " |
| I.D. | 1/2 " |
| Minimum Diameter | 13/16 " |
| Maximum Diameter | 15/16 " |
| Shrink Range | 13/16 - 15/16 |
| UNSPSC #: | 31162906 |
| TAA Compliant: | Yes |
| Weight: | 0.1 lb |
Product Restrictions
