Self-Piercing Rivet, Used on Aluminum Body Panels, Coated Steel, Tin/Zinc Plated, 3.3mm Body Diameter, 4mm Length
(Pack of
25)
Self-piercing rivets are the most common fastening method used by the OEMs. They are specially-coated steel rivets that pierce the outer body panel and mushroom into the inner body panel without piercing it. A special coating, usually tin/zinc, prevents galvanic corrosion. A special tool is used to press the rivet into place and it must have access to both sides of the panel. Self-piercing rivets are used on aluminum body panels because they duplicate the performance of spot welds without heating the aluminum.
Frequently Bought Together
Radiator Panel Retainer Nylon 1"
Couldn't load pickup availability
Radiator Side Air Baffle Retainer Nylon 11/16"
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability
Bumper Fascia Drive Rivet and Fender Apron Plastic
Couldn't load pickup availability
Air Dam and Grille Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
SAE Flat Washer 3/4" 13/16" ID 1-1/2" OD
Couldn't load pickup availability
P Series Lead Clip-On Wheel Weight 1oz
Couldn't load pickup availability
Tire Repair Valve Extension Cap
Couldn't load pickup availability
Tubeless Tire Snap-In Valve 1-1/4"
Couldn't load pickup availability
Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Self-Drilling Screw Hex Head #10-16 x 3/4"
Couldn't load pickup availability
Self Piercing Rivet Ford: W708714-S900
Couldn't load pickup availability
Self-Piercing Rivet 3.35 x 3.5mm
Couldn't load pickup availability
Molding Clip Nylon White 11 x 20mm
Couldn't load pickup availability
Product Description
Self-piercing rivets are the most common fastening method used by the OEMs. They are specially-coated steel rivets that pierce the outer body panel and mushroom into the inner body panel without piercing it. A special coating, usually tin/zinc, prevents galvanic corrosion. A special tool is used to press the rivet into place and it must have access to both sides of the panel. Self-piercing rivets are used on aluminum body panels because they duplicate the performance of spot welds without heating the aluminum.Technical Specifications
| Item#: | 1488997 |
|---|---|
| Type | Self-Piercing Rivet |
| Body Diameter | 3.3 mm |
| Rivet Length | 4.0 mm |
| Quantity Per Package | 25.0000 |
| UNSPSC #: | 31162200 |
| TAA Compliant: | No |
| Weight: | 0.01 lb |
Product Restrictions
