SnapSkru® Self-Drilling Wall Anchor Kit 50Pcs
(Pack of
1.0)
18286 Contains:25 SnapSkru™ Standard Anchors (No. 50878) and 25 No. 8 x 1-1/2" Phillips Pan Head Sheet Metal Screws (No. 85222)
• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Couldn't load pickup availability
Catalog page#: 6-41
Frequently Bought Together
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 201Pcs
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 3/4 x 5-1/2"
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #4 to #10
Couldn't load pickup availability
Hex Cap Screw Grade 8 Alloy Steel 1/4-20 x 1"
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 1/2-13
Couldn't load pickup availability
Self-Drilling Screw Hex Head #12-14 x 3/4"
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Product Description
18286 Contains:25 SnapSkru™ Standard Anchors (No. 50878) and 25 No. 8 x 1-1/2" Phillips Pan Head Sheet Metal Screws (No. 85222)• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Technical Specifications
| Item#: | 18286 |
|---|---|
| Type | Wall Anchors |
| Material | Nylon |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.59 lb |
