SNAPTOGGLE® Toggle Bolt Anchor 3/16-24
(Pack of
25.0)
• Three times faster than conventional toggle bolts
• Requires a smaller pilot hole and uses a shorter bolt
• Stays in place with or without a bolt
• Heads won’t fall behind wall
• Wall or ceiling thickness range: 3/8" – 2-1/2"
• Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
• Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Frequently Bought Together
Conical Screw Anchor Kit Plastic 301Pcs
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 3"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #6-32 x 2"
Couldn't load pickup availability
Wing Type Toggle Bolt Steel #10-24 x 3"
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #6 to #10
Couldn't load pickup availability
Product Description
• Three times faster than conventional toggle bolts• Requires a smaller pilot hole and uses a shorter bolt
• Stays in place with or without a bolt
• Heads won’t fall behind wall
• Wall or ceiling thickness range: 3/8" – 2-1/2"
• Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
• Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Technical Specifications
| Item#: | 90917 |
|---|---|
| Type | Toggle Bolt Anchor |
| Size | #10-24 |
| Diameter | 3/16 " |
| Thread | Coarse |
| Thread Pitch | 24 tpi |
| Drill Size | 1/2 " |
| Tensile Proof Test Load In Concrete | 714 lb |
| Shear Proof Test Load | 670 lb |
| Tensile Proof Test Load | 645 lb |
| Bolt Size | #10-24 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.86 lb |
Product Restrictions
