Steel Expansion Plug, Shallow Cup, Zinc Plated, Clean Hole with Tuff-Grit™ Screen Mesh, 1-1/2"
(Pack of 10)

SKU:84081 Item#: 84081

Lawson Products

• Stamped with fractional and decimal size
1. Clean hole with Tuff-Grit™ Screen Mesh (see Abrasives section).
2. Apply Loctite® 609™ Retaining Compound, Item No. 1143653 (Canada Item No. 1166418 ), around outside of plug.
3. Spread retaining compound around inside hole.
4. Install plugs with proper tooling.

Check Availability

Usually Ships: Today

While Supplies Last

Quantity

Catalog page#: 22-24

Frequently Bought Together

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Splash Shield and Fascia Retainer Nylon 1"

Aluminum Drain Plug Gasket/Sealing Ring M14 x M24

Item#: P65877M01

Cable Tie 13.38" Black

1-1/2" x 50 Yds. Abrasive Shop Roll, 180 Grit, Aluminum Oxide

Item#: PM08145180

1-1/2" x 50 Yds. Abrasive Shop Roll, 180 Grit, Aluminum Oxide

Item#: PM08145180

Product Description

• Stamped with fractional and decimal size
1. Clean hole with Tuff-Grit™ Screen Mesh (see Abrasives section).
2. Apply Loctite® 609™ Retaining Compound, Item No. 1143653 (Canada Item No. 1166418 ), around outside of plug.
3. Spread retaining compound around inside hole.
4. Install plugs with proper tooling.

Technical Specifications

Item#:	84081
Style	Shallow
Size	1-1/2 "
Material	Steel
Plating	Zinc
UNSPSC #:	25174000
TAA Compliant:	Yes
Weight:	0.51 lb

Suggested Products

Woven Polyester Electrical Tape 19mm x 25m

Fender Splash Shield Retainer Nylon 20mm

Fender Bumper Shield Retainer 11/16"

Phillips Round Washer Head Drill Point Screw #8

Universal Neoprene Captive Brass Well Nut #10-32

P Series Lead Clip-On Wheel Weight 0.50oz

Shroud Insulating Button Nylon 11/16"

P Series Lead Clip-On Wheel Weight 0.75oz

MCN Series Lead Clip-On Wheel Weight 1/2 oz

Tire Patch Cement 8oz Chemical

Front Fender Push-Type Retainer Nylon 20mm

Your Recently Viewed Items