Terminal Crimping Tool with Interchangeable Die, 26-16 AWG, Full Cycle Ratchet, Suitable for Open Barrel Non-Insulated Terminals
(Pack of
1)
SKU:95111 Item#: 95111
• Professional tool incorporating a single frame with several interchangeable dies
• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Couldn't load pickup availability
Catalog page#: 17-72
Frequently Bought Together
Crimping Tool 8 AWG-1/0 AWG 15"
Couldn't load pickup availability
Terminal Crimp Tool Assortment
Couldn't load pickup availability
Terminal Crimp Die RG58/RG59/62A/U
Couldn't load pickup availability
Jolt Saver Voltage Tester
Couldn't load pickup availability
Hands Free Butane Torch Self Igniting
Couldn't load pickup availability
Receptacle/GFCI Tester 120VAC
Couldn't load pickup availability
3/4" X 24" Pinch Pry Bar
Couldn't load pickup availability
Router Trimmer Tool Charging Bundle
Couldn't load pickup availability
Circular Saw Charging Bundle
Couldn't load pickup availability
Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
11Pc Lock and Load Hammer Set
Couldn't load pickup availability
10" Forman's Favorite Heavy-Duty Copper & Aluminum Cable Cutter Pliers
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
Couldn't load pickup availability
Product Description
• Professional tool incorporating a single frame with several interchangeable dies• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Technical Specifications
| Item#: | 95111 |
|---|---|
| Type | Crimping Tool |
| Style | Terminal Connector Crimping System |
| Crimp Range | 22-10 AWG |
| Description | Tool with 95106 Die |
| UNSPSC #: | 27111500 |
| TAA Compliant: | Yes |
| Weight: | 1.86 lb |
