Terminal Crimping Tool with Interchangeable Die, RG58/RG62, Full Cycle Ratchet, Suitable for BNC and TNC Coaxial Connectors
(Pack of
1)
SKU:95110 Item#: 95110
• Professional tool incorporating a single frame with several interchangeable dies
• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Couldn't load pickup availability
Catalog page#: 17-72
Frequently Bought Together
Quick Connect Crimping Tool 26-6 AWG
Couldn't load pickup availability
2GA/25mm Replacement Die
Couldn't load pickup availability
Terminal Crimp Die 22-18 AWG
Couldn't load pickup availability
Permanent Marking Pen Black
Couldn't load pickup availability
Jolt Saver Voltage Tester
Couldn't load pickup availability
Terminal Crimping Tool Ratcheting 22-10 AWG
Couldn't load pickup availability
Twist-On Holding Pad 30000rpm 2"
Couldn't load pickup availability
Rotary Hammer Charging Bundle
Couldn't load pickup availability
Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/8"
Couldn't load pickup availability
2.1 Round Head Ratchet 1/4 Drive 168 Tooth
Couldn't load pickup availability
Product Description
• Professional tool incorporating a single frame with several interchangeable dies• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Technical Specifications
| Item#: | 95110 |
|---|---|
| Type | Crimping Tool |
| Style | Terminal Connector Crimping System |
| Size | 58/62 |
| Description | Tool with 95105 Die |
| UNSPSC #: | 27111500 |
| TAA Compliant: | Yes |
| Weight: | 1.82 lb |
