Copper Coated Outer Tube With Internal Steel Core Rods That Burn At 10000F To Melt Or Liquefy Virtually Any Know Substance
(Pack of
1)
SKU:EG16503836 Item#: EG16503836
This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.
• Cuts, gouges and pierces almost all materials — steel, steelreinforced concrete, stainless, composites and more!
• Burns through almost anything quickly — faster than a carbonarc or oxy-acetylene torch
• Economical — rods last longer and cut more material than other systems
Frequently Bought Together
X-Cut Exothermic Cutting Rod 10,000 Deg Operating Temperature 25/Box
Couldn't load pickup availability
1/2" Id Enternal Exothermic Rod Collet
Couldn't load pickup availability
3/8"X 50Ft Green Oxygen Hose
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability
Rosin Core Solder 0.032"
Couldn't load pickup availability
E7018 Mild/Carbon Steel Stick Electrode 1/8"
Couldn't load pickup availability
X-Tractalloy Extracting Welding Electrode Non-Conductive Flux 3/32
Couldn't load pickup availability
Cable Connector Assembly 1/0 to 3/0 AWG
Couldn't load pickup availability
Carbon Air Arc Stick Rod Electrode 3/8"
Couldn't load pickup availability
Large MIG Plier
Couldn't load pickup availability
Product Description
This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.• Cuts, gouges and pierces almost all materials — steel, steelreinforced concrete, stainless, composites and more!
• Burns through almost anything quickly — faster than a carbonarc or oxy-acetylene torch
• Economical — rods last longer and cut more material than other systems
Technical Specifications
| Item#: | EG16503836 |
|---|---|
| Welding Process | Exothermic Electrode |
| Type | Cutting Rod |
| Diameter | 3/8 " |
| Length | 36 " |
| UNSPSC #: | 23271700 |
| TAA Compliant: | Yes |
| Weight: | 17.19 lb |
