When used with adhesive anchoring compound, these anchors provide a superior concrete anchoring system and withstand more seismic vibration loading than most mechanical anchors
Adhesive anchoring compound adheres to the entire length of the anchor body for excellent ultimate tensile strength
Through-hole installation is ideal for in-place fastening applications no need to move equipment or fixtures
Can be used with hex bolts, mushroom head bolts and threaded rod with nuts
The use of anchoring epoxy/compound is required
NOTE: Allow anchoring compound to fully cure before applying maximum load.
Use for equipment mounting, conveyor and rack installation, stadium seating and highway construction
1. Select the proper size drill bit. Drill the hole perpendicular to the work surface.* To assure full holding power, do not ream the hole or allow the drill to wobble.
2. Clean hole with compressed air and a nylon brush.* Dust and debris left in hole will significantly reduce the holding capacity of the anchor.
3. Inject adhesive anchoring compound into hole to approximately 1/3 to half full.
4. Choose a fastener equal in length to the thread depth plus the material depth. Thread fastener into
Drill size equals anchor body diameter
*Always wear safety glasses. Use only solid carbide-tipped drill bits meeting ANSI B94 diameter standards.