Drop-In Anchor - 50200 | LawsonProducts.com

Drop-In Anchor

Drop-In Anchor, 3/4-10 x 6-1/2"  (Pack of 2)

Price :
Standard Pack :
2   ea.
Ship Weight :
Catalog Page# :
Usually Ships:What's This?


• When used with adhesive anchoring compound, these anchors provide a superior concrete anchoring system and withstand more seismic vibration loading than most mechanical anchors
• Adhesive anchoring compound adheres to the entire length of the anchor body for excellent ultimate tensile strength
• Through-hole installation is ideal for in-place fastening applications – no need to move equipment or fixtures
• Can be used with hex bolts, mushroom head bolts and threaded rod with nuts
• The use of anchoring epoxy/compound is required
NOTE: Allow anchoring compound to fully cure before applying maximum load.
• Use for equipment mounting, conveyor and rack installation, stadium seating and highway construction
1. Select the proper size drill bit. Drill the hole perpendicular to the work surface.* To assure full holding power, do not ream the hole or allow the drill to wobble.
2. Clean hole with compressed air and a nylon brush.* Dust and debris left in hole will significantly reduce the holding capacity of the anchor.
3. Inject adhesive anchoring compound into hole to approximately 1/3 to half full.
4. Choose a fastener equal in length to the thread depth plus the material depth. Thread fastener into
Drill size equals anchor body diameter
*Always wear safety glasses. Use only solid carbide-tipped drill bits meeting ANSI B94 diameter standards.

Tech Specs

Item# :
Product Name :
Drop-In Anchor
Size :
3/4 "
Thread Pitch :
10 tpi
Overall Length :
6-1/2 "
Thread Depth :
1-1/2 "
Type :
High Strength Drop-In Anchor
Thread Diameter :
3/8 "
Drill Size :
1 "
Hole Depth :
7-1/2 "
Diameter :
3/4 "
TAA Compliant:


  • Montage-1
  • Engineering-Case-Study-1