Heat Shrink 16-14 AWG - 61657 | LawsonProducts.com

Heat Shrink 16-14 AWG

Heat Shrink 16-14 AWG, Black, 0.250" I.D. Before Shrinkage 0.125" I.D. After Shrinkage  (Pack of 10)

Item#
61657
Price :
Standard Pack :
10   ea.
Ship Weight :
.05
Catalog Page# :
16-36
Usually Ships:What's This?
Today
 

Description

• 2:1 shrink ratio
• Easily assembled over components, connectors or other irregular shapes
• Flame-retardant
• Non-corrosive
• Non-nutrient – fungus resistant
• Excellent fluid resistance
• Meets or exceeds MIL-1-23053 D/5, Class I, II and III; AMS 3636C and AMS 3637B requirements
• Tensile strength: 1,500 PSI
• Elongation: 200%
• Dielectric strength: 500V/mil
• Volume resistivity: 1015 Ohm/cm
• Heat shock: Four hours at 482°F (250°C)
• Low temperature flexibility: Four hours at –67°F (–55°C)
• Longitudinal change: Less than 5%
• Secant modulus: 12,000 PSI
• Rated at 600V
• Used as electrical insulation over cable splices and terminations, and for wire harness covering, bundling and wire marker identification
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.

Tech Specs

Item# :
61657
Product Name :
Heat Shrink 16-14 AWG
Wire Gauge Coverage :
16-14 AWG
Diameter :
1/4 "
Length :
6 "
Color :
Black
I.D. Before Shrinkage :
0.250 "
I.D. After Shrinkage :
0.125 "
Wall Thickness After Shrinkage :
0.025 "
Dielectric Strength :
500 V/mm
Voltage Rating :
600 V
Elongation :
200 %
Tensile Strength :
1500 PSI
Heat Shock :
4 hours at 482 degrees F
Secant Modulus :
12,000 PSI
Longitudinal Change :
Less than 5%
Approvals :
CSA, UR and Meets or exceeds MIL-1-23053 D/5, Class I, II and II; AMS 3636C and AMS 3637B requirements
Style :
Tru-Shrink Thin Wall Heat Shrink
Type :
Heat Shrink Tubing
UNSPSC #:
39121723
TAA Compliant:
No