Nylon Insert Flange Nut Grade 8 3/4-10
(Pack of
5.0)
Nylon insert has low coefficient of friction (will not damage bolt threads), high resilience, low chemical activity and relatively great hardness
Locks uniformly over entire range of bolt thread tolerances and has low, even torque scatter, permitting repeated predictable tightening torques
Grade G for use with Grade 8
Solves the problem of an oversized hole and eliminates the need for a washer
Non-serrated flange will not mar the surface
Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut or on the flange
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog page#: 3-28
Frequently Bought Together

USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability

Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability

Hex Nut Grade 5 Steel 5/16-18
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 5/8-18
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade A 5/8-11
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 1-8
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade A 1/4-20
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 7/16-14
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade A 3/8-16
Couldn't load pickup availability

Master Security Bit Set 203Pc
Couldn't load pickup availability

Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
Product Description
Nylon insert has low coefficient of friction (will not damage bolt threads), high resilience, low chemical activity and relatively great hardness Locks uniformly over entire range of bolt thread tolerances and has low, even torque scatter, permitting repeated predictable tightening torques
Grade G for use with Grade 8
Solves the problem of an oversized hole and eliminates the need for a washer
Non-serrated flange will not mar the surface
Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut or on the flange
Technical Specifications
Item#: | 18250 |
---|---|
Diameter | 3/4 " |
Thread Pitch | 10 |
Grade | 8 |
Finish | Bright Zinc |
Type | Flange Nuts |
Material | Alloy Steel |
Thickness | 0.825 " |
Across Flats | 1-1/4 " |
Thread | Coarse |
Specifications | IFI 100/107 |
Flange Diameter | 1.585 " |
UNSPSC #: | 31161712 |
TAA Compliant: | No |
Weight: | 0.8 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
