Chain Sling, Grade 80, 3/8" x 6', Type CO, Single Leg, Oblong Master Link & Oblong Master Link
(Pack of
1)
SKU:1419216 Item#: 1419216
An identification tag is affixed to each sling and lists the following information:
Grade
Size
Reach
Serial Number
Number of Legs
Working Load Limit at stated angle
American National Standard ANSI B30.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting.
Items are made-to-order and are non-returnable.
Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
9/32" x 10' Type SSS Gr. 80 Chain Sling
Couldn't load pickup availability
3/8" x 10' Type SOS Gr. 80 Chain Sling
Couldn't load pickup availability
1/2" x 10' Type QOS Gr. 80 Chain Sling
Couldn't load pickup availability
Screw Pin Anchor Shackle, 3/8", 3,000 lb WLL
Couldn't load pickup availability
Tarp Strap Epdm Rubber with Hooks 24" Long
Couldn't load pickup availability
Wire Rope Sleeve, 1/16", Copper, Zinc Plated
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
Webmaster® 1600 Web Sling, Nylon, Yellow, 3' Length
Couldn't load pickup availability
Webmaster® 1600 Web Sling, Polyester, Yellow, 4' Length
Couldn't load pickup availability
Adjust-A-Link™ Chain Sling, Grade 100, 10' Length
Couldn't load pickup availability
Product Description
An identification tag is affixed to each sling and lists the following information: Grade
Size
Reach
Serial Number
Number of Legs
Working Load Limit at stated angle
American National Standard ANSI B30.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting.
Items are made-to-order and are non-returnable.
Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°.
Technical Specifications
| Item#: | 1419216 |
|---|---|
| Type | Single |
| Grade | 80 |
| Chain Size | 3/8 " |
| Reach | 6 ft |
| Assembly Type | Mechanical |
| Configuration | CO |
| Attachment Type | Oblong Link Each End |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
