Annular Cutter, 1-11/16" Diameter, 1" Depth of Cut
(Pack of
1)
SKU:15242 Item#: 15242
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.
• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
High-Performance M2-AL Annular Cutter 2-5/16"
Couldn't load pickup availability
1-3/8" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
7/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
CryoBore 13/16" Dia. Annular Cutter, 1-3/16" Cutting Depth
Couldn't load pickup availability
High-Performance M2-AL Annular Cutter 1-3/16"
Couldn't load pickup availability
HSS Annular Cutter 2-5/16"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/32"
Couldn't load pickup availability
3/8" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability
Mounted Flap Wheel 2" 60 Grit
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/64"
Couldn't load pickup availability
0.5 HP Reciprocating Air Saw
Couldn't load pickup availability
Universal Socket Set, SAE, 3/8" Drive, 8pc
Couldn't load pickup availability
6" x 9" Non-Woven Hand Pad, Green, Medium
Couldn't load pickup availability
2" Dia. X 1" Wide, Flap Wheel, 80 Grit, 1/4" Shank
Couldn't load pickup availability
Slasher Cut-Off Wheel, All Steel, 2 Inch X 1/32 Inch X 3/8 Inch
Couldn't load pickup availability
6" x 9" Non-Woven Hand Pad, Green, Medium
Couldn't load pickup availability
2" Dia. X 1" Wide, Flap Wheel, 80 Grit, 1/4" Shank
Couldn't load pickup availability
Slasher Cut-Off Wheel, All Steel, 2 Inch X 1/32 Inch X 3/8 Inch
Couldn't load pickup availability
Product Description
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 15242 |
|---|---|
| Manufacturer Model #: | SM-AC-1688-1 |
| Cutting Diameter | 1-11/16 " |
| Depth of Cut | 1 " |
| Tooth Material | M2-AL |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.57 lb |
