Comfort Scrape Anti-Fatigue Mat, Black, 3' Wide x 5' Long, 3/8'' Thick
(Pack of
1)
SKU:1317726 Item#: 1317726
Superior Anti-fatigue properties ensure employee comfort and ergonomic benefits. 100% high density, closed cell nitrile rubber cushion provides maximum resistance to waters, oils, greases, chemicals and animal fat. Lightweight, easy to clean material outperforms most thicker, heavier mats. Simply hose off or pressure wash to remove debris. Low profile design, 7/16 inch thick, and slip resistant surface helps minimize slip and fall accidents. Soft, anti-static nitrile rubber compound is ideal for use in packaging and assembly areas, industrial workstations, machine shops and welding stations.
FEATURES
• Light weight makes Comfort Scrape easy to clean and handle.
• Provides superior anti-fatigue properties for employee comfort and ergonomic benefits.
• 100% high-density, closed cell nitrile cushion with Green 10% recycled content
• Beveled edges for safe access.
• Anti-micorbial treated to guard against odors and degradation.
• Grease proof nitrile construction.
• Welding Safe
• Certified slip-resistant by the National Floor Safety Institute.
• Recommended for use in packing and assembly areas, industrial workstations and food services locations.
• RUBBER TYPE: Nitrile Rubber (10% recycled content) High Density Closed Cell Foam
• THICKNESS: 3/8"
• COLOR: Black
• DUROMETER: 50 to 55
• TESTING
• Passes Flammability Standard DOC-FF-1-70
• Anti-Static- Electrical Resistance – IBM (Surface to Ground) ASTM F-150 & NFPA 99 Chapter 12 Section 4.1.3.8 (6) (7), 1990. Average Ele4ctrical Resistance at 70° F. and 50% Relative Humidity: 5.4 x 10^8 ohms.
• AATCC Test Method 134-1991 Electrostatic Propensity of Carpets. Maximum Voltage Negative 0.3 KV.
• UV Stable
• ASTM C1028-96 Static Coefficient of Friction: Dry- .70 Wet- .69
1. Daily Cleaning
•Anti-fatigue mats should be cleaned daily by sweeping or brushing to remove loose soil and debris. These impurities can cause excessive wear on the surface of the mats and shorten product life. The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement.
2. Routine Cleaning
•On a regular basis, anti-fatigue mats should be cleaned with water-based cleaners to remove oil and grease where needed. We do not recommend the use of solvent-based cleaners. It is important to use cleaners strong enough with proper agitation to remove fats and other food related oils. Research has shown that even grease-proof rubber can be affected by grease and oil if the grease and oil are allowed to remain in contact with the mat for extended periods of time. Andersen recommends thorough cleaning at least weekly to avoid prolonged contact of grease with the rubber.
Frequently Bought Together
WorkStep Anti-Fatigue Mat
Couldn't load pickup availability
Diamond Star Anti-Fatigue Mat
Couldn't load pickup availability
Diamond Star Anti-Fatigue Mat
Couldn't load pickup availability
Valve Action® Permanent Paint Marker Orange
Couldn't load pickup availability
Valve Action® Permanent Paint Marker Blue
Couldn't load pickup availability
Round Tag Brass 1"
Couldn't load pickup availability
CleanTeam® 30-Layer Contamination Control Mat, Blue, 36 x 60", LDPE, 0.05 mm Thickness per Layer
Couldn't load pickup availability
CleanTeam® 30-Layer Contamination Control Mat, White, 26 x 45", LDPE, 0.05 mm Thickness per Layer
Couldn't load pickup availability
CleanTeam® 30-Layer Contamination Control Mat, Blue, 36 x 45", LDPE, 0.05 mm Thickness per Layer
Couldn't load pickup availability
GreenBoom Oil-Only Loose Sorbent 154lbDr
Couldn't load pickup availability
DEXGUARD™ A4 Cut Gloves, Level 4 Abrasion Resistant, Foam Nitrile Coating
Couldn't load pickup availability
DEXGUARD™ A4 Cut Gloves, Level 4 Abrasion Resistant, Foam Nitrile Coating
Couldn't load pickup availability
LCT Lens Cleaning Towelettes
Couldn't load pickup availability
Universal High-Visibility Sorbent Pad
Couldn't load pickup availability
General Purpose Duct Tape 48 mm x 55m
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
Product Description
Superior Anti-fatigue properties ensure employee comfort and ergonomic benefits. 100% high density, closed cell nitrile rubber cushion provides maximum resistance to waters, oils, greases, chemicals and animal fat. Lightweight, easy to clean material outperforms most thicker, heavier mats. Simply hose off or pressure wash to remove debris. Low profile design, 7/16 inch thick, and slip resistant surface helps minimize slip and fall accidents. Soft, anti-static nitrile rubber compound is ideal for use in packaging and assembly areas, industrial workstations, machine shops and welding stations.FEATURES
• Light weight makes Comfort Scrape easy to clean and handle.
• Provides superior anti-fatigue properties for employee comfort and ergonomic benefits.
• 100% high-density, closed cell nitrile cushion with Green 10% recycled content
• Beveled edges for safe access.
• Anti-micorbial treated to guard against odors and degradation.
• Grease proof nitrile construction.
• Welding Safe
• Certified slip-resistant by the National Floor Safety Institute.
• Recommended for use in packing and assembly areas, industrial workstations and food services locations.
• RUBBER TYPE: Nitrile Rubber (10% recycled content) High Density Closed Cell Foam
• THICKNESS: 3/8"
• COLOR: Black
• DUROMETER: 50 to 55
• TESTING
• Passes Flammability Standard DOC-FF-1-70
• Anti-Static- Electrical Resistance – IBM (Surface to Ground) ASTM F-150 & NFPA 99 Chapter 12 Section 4.1.3.8 (6) (7), 1990. Average Ele4ctrical Resistance at 70° F. and 50% Relative Humidity: 5.4 x 10^8 ohms.
• AATCC Test Method 134-1991 Electrostatic Propensity of Carpets. Maximum Voltage Negative 0.3 KV.
• UV Stable
• ASTM C1028-96 Static Coefficient of Friction: Dry- .70 Wet- .69
1. Daily Cleaning
•Anti-fatigue mats should be cleaned daily by sweeping or brushing to remove loose soil and debris. These impurities can cause excessive wear on the surface of the mats and shorten product life. The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement.
2. Routine Cleaning
•On a regular basis, anti-fatigue mats should be cleaned with water-based cleaners to remove oil and grease where needed. We do not recommend the use of solvent-based cleaners. It is important to use cleaners strong enough with proper agitation to remove fats and other food related oils. Research has shown that even grease-proof rubber can be affected by grease and oil if the grease and oil are allowed to remain in contact with the mat for extended periods of time. Andersen recommends thorough cleaning at least weekly to avoid prolonged contact of grease with the rubber.
Technical Specifications
| Item#: | 1317726 |
|---|---|
| Manufacturer Model #: | 430 |
| Surface | Textured |
| Size | 3 x 5 ft |
| Width | 3 ft |
| Length | 5 ft |
| Thickness | 3/8 " |
| Color | Black |
| Basic Color | Black |
| Shape | Rectangular |
| Material | Nitrile |
| Border Style | Rubber |
| Backing Style | Chemical Resistant |
| Backing Material | SBR Rubber |
| Applications | Anti-Fatigue Mat |
| Quantity Per Package | 1.0000 |
| UNSPSC #: | 52101510 |
| TAA Compliant: | Yes |
