CryoBoost Cobalt Drill Bit, 19/64" Dia. W/Flats
(Pack of 1)

CryoTool®

Cryogenically treated, new patented CryoBoost™ Cobalt stepped tip design cuts faster, lasts longer and starts holes easier than any other drill bit in the market. CryoBoost™ Cobalt bits are more heat resistant than high speed steel and are specifically designed for drilling very hard, abrasive material such as stainless steel, titanium and cast iron.
• Long Lasting - Stays sharp up to 4X longer compared to conventional and other specialty tip designs, allowing more holes per bit
• Easy Starting - The multi-stepped tip acts like a step drill, allowing for laser like holes through stainless steel, titanium and cast iron and prevents walking on curved surfaces
• Reduces Number of Tools Required - By eliminating the need to drill pilot holes projects can be completed faster using fewer tools
• Cryophase™ Treatment - The treatment enhances tool flexibility, provides longer tool life, and higher heat resistance
• 3-Flatted Shank - Allows bits to be used in cordless drills and with the 3-flat shank it won’t slip in keyless chucks
Specifications
• Tip Design: Stepped tip
• Hardness: 65-68Rc
• Temperature Resistance: 1112°F
• Material: Cobalt
• Surface: Gold-Oxide with bright tip
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More

Frequently Bought Together

DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 15/64"

Item#: 84732
DV_ZoomOriginal_I_93228.jpg

Abrasive Hand Pad All Purpose 6 x 9"

Item#: 93228
DV_ZoomOriginal_P_22765.jpg

Cut-Off Wheel for Right Angle Grinder 4-1/2"

Item#: 60773M12
DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 1/8"

Item#: 84725M06
DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 9/32"

Item#: 84735
DV_ZoomOriginal_P_CTPMP1084.jpg

3/8" Fractional Drill Bit, Jobber Length, W/Flats

Item#: PM08200041
DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 1/8"

Item#: 84725M06
DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 9/32"

Item#: 84735
DV_ZoomOriginal_P_CTPMP1084.jpg

3/8" Fractional Drill Bit, Jobber Length, W/Flats

Item#: PM08200041
DV_ZoomOriginal_P_41097_WB.jpg

Hex Cap Screw Grade 8 Alloy Steel 5/8-18 x 1-1/2"

Item#: 896
DV_ZoomOriginal_P_CTPMP1235.jpg

CryoBoost 5/16" Dia. 1/4" Hex Shank Drill Bit

Item#: DY83612064
DV_ZoomOriginal_I_93072.jpg

Telcom IDC Discrete Connector 26 to 19 AWG

Item#: 93072
DV_ZoomOriginal_I_1495188.jpg

Stepdown Butt Connector 22 to 18/16 to 14 AWG

Item#: 1495188
DV_ZoomOriginal_P_HT5273.jpg

Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece

Item#: DY89320050
DV_ZoomOriginal_I_88437.jpg

SAE Flat Washer Thru-Hardened Steel 3/8"

Item#: 88437
DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 5/16"

Item#: 84737
DV_ZoomOriginal_P_994.jpg

Jobber Length Drill Bit HSS 1/2"

Item#: 84749
DV_ZoomOriginal_P_HT5156.jpg

Large Index-Tend Pry Bar

Item#: DY89320018

Product Description

Cryogenically treated, new patented CryoBoost™ Cobalt stepped tip design cuts faster, lasts longer and starts holes easier than any other drill bit in the market. CryoBoost™ Cobalt bits are more heat resistant than high speed steel and are specifically designed for drilling very hard, abrasive material such as stainless steel, titanium and cast iron.
• Long Lasting - Stays sharp up to 4X longer compared to conventional and other specialty tip designs, allowing more holes per bit
• Easy Starting - The multi-stepped tip acts like a step drill, allowing for laser like holes through stainless steel, titanium and cast iron and prevents walking on curved surfaces
• Reduces Number of Tools Required - By eliminating the need to drill pilot holes projects can be completed faster using fewer tools
• Cryophase™ Treatment - The treatment enhances tool flexibility, provides longer tool life, and higher heat resistance
• 3-Flatted Shank - Allows bits to be used in cordless drills and with the 3-flat shank it won’t slip in keyless chucks
Specifications
• Tip Design: Stepped tip
• Hardness: 65-68Rc
• Temperature Resistance: 1112°F
• Material: Cobalt
• Surface: Gold-Oxide with bright tip
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: DY83621964
Drill Length Jobber
Drill Type Fractional
Type Heavy Duty
Material Cobalt
Finish Gold
Diameter 19/64 "
Decimal Equivalent 0.2969 "
Point Stepped Tip
Flute Length 3-1/16 "
Flute Type Spiral
Shank Straight
Flats 3
Overall Length 4-3/8 "
UNSPSC #: 27111559
TAA Compliant: No
Weight: 0.055 lb

Your Recently Viewed Items