Damaged Screw Remover Extractor #3
(Pack of
1.0)
• Reusable – just clean off chips and lubricate
• Removes stripped-out and damaged screws quickly and easily
• Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
• For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-67
Frequently Bought Together
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/8"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 15/64"
Couldn't load pickup availability
Broken Bolt Power Extractor 5/16"
Couldn't load pickup availability
Micro Screw Power Extractor 1/4"
Couldn't load pickup availability
Broken Bolt Power Extractor 1/4"
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Tapered Flute Screw Extractor 5/16 to 3/8"
Couldn't load pickup availability
Straight Fluted Screw Extractor 1/4 to 5/16"
Couldn't load pickup availability
Straight Fluted Screw Extractor 5/32 to 3/16"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 13/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/2"
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Brown
Couldn't load pickup availability
Product Description
• Reusable – just clean off chips and lubricate• Removes stripped-out and damaged screws quickly and easily
• Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
• For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63214 |
|---|---|
| Type | Screw Remover |
| Industry Number | 3 |
| For Sizes | No. 12 - No. 14 |
| UNSPSC #: | 27111709 |
| TAA Compliant: | No |
| Weight: | 0.05 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
