DOT Compression Sleeve Brass 3/4"
(Pack of
10.0)
Create secure, leak-proof connections effortlessly with our brass compression sleeve. Designed for use with copper, brass, and aluminum tubing, this DOT fitting sleeve works seamlessly with a compression nut and fitting to form a watertight seal in low-pressure systems like air, oil, and water lines. Its innovative design eliminates the need for flaring tools—just tighten the nut, and the sleeve locks snugly between the fitting body and nut for a dependable seal. Perfect for plumbing, fuel lines, and various industrial applications, it’s your go-to solution for reliable and efficient pipe connections.
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
DOT Compression Elbow Male 90° Brass 5/8 x 1/2"
Couldn't load pickup availability
DOT Compression Union Brass 3/4"
Couldn't load pickup availability
DOT Compression Connector Male Brass 5/8 x 1/2"
Couldn't load pickup availability
DOT Elbow Male Nylon 1/4 x 1/8-27
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/4"
Couldn't load pickup availability
DOT Union Tee Nylon 1/4 x 1/4 x 1/4"
Couldn't load pickup availability
Miniature Clamp SS 7/32 to 5/8"
Couldn't load pickup availability
Constant Torque Hose Clamp SS 2-1/4 to 3-1/8"
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
Couldn't load pickup availability
DOT Union Brass 3/8 x 3/8"
Couldn't load pickup availability
Pipe Bushing Brass 3/8-18 x 1/4-18
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
180-degree Wide Beam Head Light with Side Light
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Product Description
Create secure, leak-proof connections effortlessly with our brass compression sleeve. Designed for use with copper, brass, and aluminum tubing, this DOT fitting sleeve works seamlessly with a compression nut and fitting to form a watertight seal in low-pressure systems like air, oil, and water lines. Its innovative design eliminates the need for flaring tools—just tighten the nut, and the sleeve locks snugly between the fitting body and nut for a dependable seal. Perfect for plumbing, fuel lines, and various industrial applications, it’s your go-to solution for reliable and efficient pipe connections.• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 84325 |
|---|---|
| Class | Air Brake Ftgs/Tubing/Accessories |
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Compression Sleeve |
| Connection Type A | Tube |
| Fitting Dimension A | 3/4 " |
| Size | 3/4 |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.19 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
