Forged Body Ball Valve Brass 1-1/4 x 1-1/4"
(Pack of
1.0)
For use in gas and pneumatic lines, this Forged Body Ball Valve is ideal for high-pressure and high-temperature applications where reliability and safety are important. Made of brass with dual sealing system that allows valve to be operated in either direction making installation easier. Other advantages include no metal-to-metal moving parts, a handle clearly showing ball position and no maintenance requirements.
• 24-hour 100% seal test guaranteed
• Working pressure: 600 PSI
• Operating temperature: –40°F to +350°F
• Chrome plated brass ball for longer life
• Silicone-free lubricant on all seals
• Approvals: CSA, FM, UL, CUL, Federal Specification WW-V-35C
Applications:
• Gas
• Pneumatic lines
• Travel stops on body to avoid stresses at stem
• Hot forged, sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications
• Full port to DIN 3357 for maximum flow
• NPT taper ANSI B.1.20.1 female by female threads
• Blowout-proof nickel plated brass stem
• Two FPM O-rings at the stem for maximum safety
• Geomet® carbon steel handle with thick PVC dip coating for thermal and electrical protection
• Handle removable with valve in service
• Pure PTFE self-lubricating seats with flexible-lip design
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 9-25
Frequently Bought Together
Hex Head Plug Brass 3/8-18 Male NPT
Couldn't load pickup availability
Hex Head Plug Brass 1/4-18 Male NPT
Couldn't load pickup availability
Hex Head Plug Brass 1/2-14 Male NPT
Couldn't load pickup availability
Weatherhead H280 Hydraulic Hose Rubber 0.94" x 50'
Couldn't load pickup availability
Weatherhead H280 Hydraulic Hose Rubber 0.81" x 50'
Couldn't load pickup availability
Weatherhead H280 Hydraulic Hose Rubber 1.09" x 50'
Couldn't load pickup availability
Weatherhead H280 Hydraulic Hose Rubber 1.41" x 50'
Couldn't load pickup availability
Weatherhead H280 Hydraulic Hose Rubber 0.94" x 50'
Couldn't load pickup availability
Weatherhead H280 Hydraulic Hose Rubber 0.81" x 50'
Couldn't load pickup availability
Hex Head Plug Brass 3/8-18 Male NPT
Couldn't load pickup availability
Hex Head Plug Brass 1/4-18 Male NPT
Couldn't load pickup availability
Hex Head Plug Brass 1/2-14 Male NPT
Couldn't load pickup availability
Quick Disconnect Plug Steel 1/4" x 1/4-18
Couldn't load pickup availability
DOT Union Nylon 1/4 x 1/4"
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Couldn't load pickup availability
Waterproof Work Aqua Light 66 LED
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
DOT Union Nylon 1/4 x 1/4"
Couldn't load pickup availability
DOT Union Brass 3/8 x 3/8"
Couldn't load pickup availability
Lens Cleaning Towelettes
Couldn't load pickup availability
Product Description
For use in gas and pneumatic lines, this Forged Body Ball Valve is ideal for high-pressure and high-temperature applications where reliability and safety are important. Made of brass with dual sealing system that allows valve to be operated in either direction making installation easier. Other advantages include no metal-to-metal moving parts, a handle clearly showing ball position and no maintenance requirements.• 24-hour 100% seal test guaranteed
• Working pressure: 600 PSI
• Operating temperature: –40°F to +350°F
• Chrome plated brass ball for longer life
• Silicone-free lubricant on all seals
• Approvals: CSA, FM, UL, CUL, Federal Specification WW-V-35C
Applications:
• Gas
• Pneumatic lines
• Travel stops on body to avoid stresses at stem
• Hot forged, sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications
• Full port to DIN 3357 for maximum flow
• NPT taper ANSI B.1.20.1 female by female threads
• Blowout-proof nickel plated brass stem
• Two FPM O-rings at the stem for maximum safety
• Geomet® carbon steel handle with thick PVC dip coating for thermal and electrical protection
• Handle removable with valve in service
• Pure PTFE self-lubricating seats with flexible-lip design
Technical Specifications
| Item#: | 63139 |
|---|---|
| Fitting Type | Ball Valve |
| Configuration | Forged Body for Gas Lines |
| Material | Brass |
| Connection Type A x B | Female NPT x Female NPT |
| Fitting Dimension A | 1-1/4-11-1/2 |
| Fitting Dimension B | 1-1/4-11-1/2 |
| Working Pressure | 600 PSI |
| Temperature Range | -40 to 350 °F |
| UNSPSC #: | 40170000 |
| TAA Compliant: | No |
| Weight: | 1.73 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
