Hollow Wall Screw Anchor, Steel, Zinc Finish, Long Style, 1/8"
(Pack of
50)
Zinc rust-resistant finish
Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 6-35
Frequently Bought Together
Masonry Anchor Hex Washer Head Steel 1/4 x 1-1/4"
Couldn't load pickup availability
SNAPTOGGLE® Toggle Bolt Anchor 1/4-20
Couldn't load pickup availability
Conical Screw Anchor Plastic #14 to #16 x 1-3/8"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability
Nylon Cable Tie 11.75" Black
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
SNAPTOGGLE® Toggle Bolt Anchor 1/4-20
Couldn't load pickup availability
Conical Screw Anchor Plastic #14 to #16 x 1-3/8"
Couldn't load pickup availability
Conical Screw Anchor Plastic #8 to #10 x 7/8"
Couldn't load pickup availability
Product Description
Zinc rust-resistant finish Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25111 |
|---|---|
| Length | 2-3/8 " |
| Type | Wall Anchor |
| Body Diameter | 1/8 " |
| Diameter | 1/8 " |
| Material | Steel |
| Finish | Zinc |
| Anchor Size | 1/8 x 2-3/8 " |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 3/4 " |
| Wall Thickness | 1/8 to 3/4 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.98 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
