HSS Combination Drill-Tap M8
(Pack of
1)
Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
118° spiral point
Three positive driving flats on the shank
Neck is reduced below minor diameter for added clearance
Made of M1 high-speed steel
Made in USA
Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-40
Frequently Bought Together

HSS Combination Drill-Tap 7/16-14
Couldn't load pickup availability

Cryo-Drap 7/16"-20 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability

HSS Combination Drill-Tap M5 x 0.8
Couldn't load pickup availability

1/2" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability

Jobber Length Drill Bit HSS 1/2"
Couldn't load pickup availability

Stemmed Crimped Wire Wheel 3"
Couldn't load pickup availability

Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability

Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability

HSS Spiral Point Hand Tap M16 x 2
Couldn't load pickup availability

HSS Spiral Point Hand Tap 5/16-18
Couldn't load pickup availability

HSS Spiral Point Hand Tap M5 x 0.8
Couldn't load pickup availability

Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 9/64"
Couldn't load pickup availability

10" Dual Jaw Adj and Pipe Wrench
Couldn't load pickup availability
Product Description
Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole 118° spiral point
Three positive driving flats on the shank
Neck is reduced below minor diameter for added clearance
Made of M1 high-speed steel
Made in USA
Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
Item#: | 27383 |
---|---|
Type | Combination Drill Tap |
Point | 118° Split |
Diameter | M8 |
Pitch | 1.25 mm |
Tap Length | 0.6900 " |
Material Thickness | 5/8 " |
Material | HSS |
Overall Length | 3.68 " |
UNSPSC #: | 23241615 |
TAA Compliant: | Yes |
Weight: | 0.05 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov



