Spiral Point Hand Tap, High Speed Steel, 3 Flute, M10 x 1.5, 2-15/16" Overall Length
(Pack of
1)
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-43
Frequently Bought Together
Mounted Flap Wheel 1"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 11/64"
Couldn't load pickup availability
1/4" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability
Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability
Self-Drilling Screw Hex Head #10-16 x 3/4"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Pilotdrive Cryotap 7/16"-14 Starter Hand Tap
Couldn't load pickup availability
HSS Spiral Point Hand Tap 3/8-24
Couldn't load pickup availability
HSS Spiral Point Hand Tap 12-24
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap M6 x 1
Couldn't load pickup availability
4-Flute HSS Plug Hand Tap M8 x 1.25
Couldn't load pickup availability
Cryotap 3/8"-16 Bottoming Hand Tap
Couldn't load pickup availability
Mechanic's Length Drill Bit Set 29Pcs
Couldn't load pickup availability
Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs
Couldn't load pickup availability
Jobber Length Drill Bit HSS 25/64"
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63500 |
|---|---|
| Type | Metric |
| Diameter | M10 |
| Pitch | 1.5 mm |
| Flutes | 3 |
| Material | HSS |
| Overall Length | 2-15/16 " |
| Recommended Drill Size | 8.5 mm |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.08 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
