Instant Gasket Maker, Black, Paste Form, 10oz Power Can
(Pack of
1)
SKU:27819 Item#: 27819
Make your own leakproof gaskets in just one minute with Lawson Instant Gasket Maker! Return equipment to service and enhance productivity with this innovative rubber gasket technology that is blow-out resistant and outperforms pre-cut gaskets. It seals instantly, sets quickly and is tack-free in five minutes.
• Can has easy dispensing lever and makes an average of 14 to 18 gaskets
• Resistant to oil, coolant, automatic transmission fluids and gear oil
• Operates in environments to 600°F (315°C) continuous, 650°F (343°C) intermittent
• Meets or exceeds requirements for oxygen sensor equipped engines
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open valve, turn nozzle counterclockwise 1/4 turn and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly “click” the nozzle back into position.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 24-5
Frequently Bought Together
242™ Removable Threadlocker Blue 1.69fl.oz
Couldn't load pickup availability
Flexseal RTV Silicone Sealant Black 3oz
Couldn't load pickup availability
TFE™ Pipe Thread Sealer With PTFE 8fl.oz
Couldn't load pickup availability
High Solids Paints Gloss White
Couldn't load pickup availability
High Solids Paints Flat Black
Couldn't load pickup availability
High Solids Paints Gray
Couldn't load pickup availability
Flexseal Dispense-A-Gasket RTV Silicone Blue 8oz
Couldn't load pickup availability
Flexseal Extension Nozzle 3"
Couldn't load pickup availability
Flexseal High Temperature RTV Silicone Sealant Red
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Nylon Cable Tie 4" Black
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability
Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability
Product Description
Make your own leakproof gaskets in just one minute with Lawson Instant Gasket Maker! Return equipment to service and enhance productivity with this innovative rubber gasket technology that is blow-out resistant and outperforms pre-cut gaskets. It seals instantly, sets quickly and is tack-free in five minutes.• Can has easy dispensing lever and makes an average of 14 to 18 gaskets
• Resistant to oil, coolant, automatic transmission fluids and gear oil
• Operates in environments to 600°F (315°C) continuous, 650°F (343°C) intermittent
• Meets or exceeds requirements for oxygen sensor equipped engines
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open valve, turn nozzle counterclockwise 1/4 turn and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly “click” the nozzle back into position.
Technical Specifications
| Item#: | 27819 |
|---|---|
| Type | Sealant and Caulk |
| Container Type | Power Can |
| Color | Black |
| Size | 10 Oz. |
| Temperature Range | -58 to 392 °F |
| Physical Form | Paste |
| UNSPSC #: | 31201600 |
| TAA Compliant: | Yes |
| Weight: | 0.79 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
