Miniature LED Bulb 25W
(Pack of
2.0)
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.
LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 19-20
Frequently Bought Together
Miniature Incandescent Bulb 12V 1.5CP
Couldn't load pickup availability
Miniature Turn Signal Lamp Incandescent 24W 12V
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 36CP
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Clear
Couldn't load pickup availability
180-degree Wide Beam Head Light with Side Light
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
Couldn't load pickup availability
Vision Pro Constant Current Work Light
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 35CP
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Nylon Cable Tie 4" Black
Couldn't load pickup availability
Product Description
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Technical Specifications
| Item#: | 1607731 |
|---|---|
| Type | Miniature |
| Light Source | LED |
| Watts | 25 |
| UNSPSC #: | 25172901 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
